2006 Toyota Sienna Owners Manual - Page 304

06 SIENNA_U (L/O 0603) -Tumbling second seat (center seat) When returning the tumbled seat to its original position: second CAUTION When folding or returning the seat, observe the following precautions in order to prevent personal injury: Once the seat is moved from the tumbled position to the folded- down position, it cannot be directly returned to the tumbled position again. (It is impossible to operate the seat in the order 1→2→1.) When you return the folded- down seat (position 2) to its tumbled position (position 1), you must return the folded- down seat (position 2) to its original position (position 3) once. (It is possible to operate the seat in the order 1→2→3→1.) D Do not fold or remove the seat while the vehicle is moving. D Be careful not to get your hands or feet pinched in the seat. When returning seats to their original position, observe the following precautions in order to prevent personal injury in a collision or sudden stop: TUMBLING SECOND SEAT 1. Lower the head restraint to the lowest position. Hold the center of the lever and pull it up. Then slide the seat to the rear- most lock position. D Make sure the seat is securely locked by pushing forward and rearward on the top of the seatback or by trying to pull up the edge of the bottom cushion. Failure to do so will prevent the seat belt from operating properly. D Make sure the seat belts are not twisted or caught in the seatback and are arranged in their proper position and are ready to use. 72 2006 SIENNA from March '06 Prod. (OM45443U)