2006 Toyota Sienna Owners Manual - Page 333

06 SIENNA_U (L/O 0603) To continue the operation, do the following: 1. Open the back door when the ignition key is in "LOCK" or "ACC" and/or the automatic transmission selector lever is in "P". 2. Push and hold the stowing switch. To operation stops, the indicator light above the switches comes on and a beep sounds for about 10 seconds if any of the following condition occur during the operation: If an object is caught between the seatback and seat cushion, the indicator light above the switches flashes and a beep sounds for about 10 seconds. Remove the object before operating the seat again. If the indicator light above the switches flashes even though there is no object between the seatback and seat cushion, contact your Toyota dealer. If an object is caught between the seat and floor, the object prevents the seat from moving. Do not continue the operation. Remove the object before operating the seat again. When the seat is already folded, the seat can be stowed using the same procedure. If an object is caught between the seatback and seat cushion, the stowing operation will not start. D When the stowing switch is released. D When the folding/returning switch, returning switch or seatback adjusting switch is pushed while the stowing switch is being pushed. After stowing the seats, open the flaps as shown in the illustration. D When the ignition key is turned to the "ON" position and the automatic transmission selector lever is moved from the "P" position. D When the automatic transmission selector lever is in the "N" position and the ignition key is turned to the "ON" position. If the engine is started during operating, the seat operation may also be stopped. 101 2006 SIENNA from March '06 Prod. (OM45443U)