2006 Toyota Sienna Owners Manual - Page 347

06 SIENNA_U (L/O 0603) -Seat belt pretensioners As far as the seat belt extender on the front passenger side is concerned, do not fail to disconnect the extender from the seat belt after the above operation in order to activate the front passenger airbag correctly when getting into the vehicle next time. When not in use, remove the extender and store in the vehicle for future use. CAUTION D After inserting the tab, make sure To connect the extender to the seat belt, insert the tab into the seat belt buckle so that the "PRESS" signs on the buckle release buttons of the extender and the seat belt are both facing outward as shown. You will hear a click when the tab locks into the buckle. When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and extender itself. the tab and buckle are locked and that the lap and shoulder portions of the belt and the seat belt extender are not twisted. The driver and front passenger seat belt pretensioners are designed to be activated in response to a severe frontal impact. When the sensor detects a severe frontal impact, the front seat belts are quickly drawn back by the retractors so that the belts snugly restrain the occupants. D Do not insert coins, clips, etc. in the buckle as this may prevent you from properly latching the tab and buckle. D If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt is fixed, because it cannot protect an adult occupant or your child from injury. 115 2006 SIENNA from March '06 Prod. (OM45443U)