2006 Toyota Sienna Owners Manual - Page 667

06 SIENNA_U (L/O 0603) -After changing wheels CAUTION Take due care in handling the ornament to avoid unexpected personal injury. 11. Check the air pressure of the replaced tire. Adjust the air pressure to the specification designated on page 501 in Section 8. If the pressure is lower, drive slowly to the nearest service station and fill to the correct pressure. Do not forget to reinstall the tire inflation valve cap as dirt and moisture could get into the valve core and possibly cause air leakage. If the cap is missing, have a new one put on as soon as possible. 12.Restow all the tools and jack securely. 13.Wrap the flat tire in the tire bag and stow temporarily in the luggage compartment. The tire bag is stored with the jack handle. As the tire carrier is designed for the compact spare tire, the standard tire cannot be stored there. As soon after changing wheels as possible, tighten the wheel nuts to the torque specified on page 501 in Section 8 with a torque wrench. Have a technician repair the flat tire and replace the spare tire with it. 435 2006 SIENNA from March '06 Prod. (OM45443U)