2006 Toyota Sienna Navigation Manual
2006 Toyota Sienna Manual
2006 Toyota Sienna manual content summary:
- 2006 Toyota Sienna | Navigation Manual - Page 1
guide provides you with information on Dynamic Laser Cruise Control Vehicle- to- Vehicle Distance Control Mode. Before operating the system, you should be thoroughly familiar with it referring to "Dynamic Laser Cruise Control" in Section 1- 7 in the Owner's Manual cruising speed changes in flashes - 2006 Toyota Sienna | Navigation Manual - Page 2
same wiper operation in the "AUTO" position). The selector lever is in the "D" or "4" position. Even if these requirements are met, the system may not operate properly under certain conditions such as bad weather. See "Owner's Manual" for details. See Owner's Manual for Complete Information. −2− - 2006 Toyota Sienna | Navigation Manual - Page 3
sufficient distance. F Dynamic laser cruise control is not a collision- avoidance system. If necessary, depress the brake pedal to ensure sufficient distance. F Dynamic laser cruise control should not be used in the following conditions: D In bad weather (such as rain, fog, snow, sandstorms) D In - 2006 Toyota Sienna | Navigation Manual - Page 4
running on the side of the same lane will occur. In this case, the dynamic laser cruise control system seats. F The laser radar sensor automatically detects dirt if dirt is sticking to the very slow vehicle at the end of the line in heavy traffic your vehicle condition (steering wheel maneuvering, - 2006 Toyota Sienna | Navigation Manual - Page 5
detects bad weather or malfunction of the system, the master warning light comes on and the alarm sounds, and one of the warning codes "E1", "E2" or "E3" will appear on the display. Warning code Master Warning Light "CRUISE" indicator light Conditions Laser radar sensor glass is dirty D Wipers - 2006 Toyota Sienna | Navigation Manual - Page 6
SIENNA (QRG_U) J Operation Procedure The operation procedure is shown as follows. For the detailed information, see Section 1- 7 in the "Owner's Manual". F Setting 1 Push the main switch ("ON- OFF" button) to turn on the system. The "CRUISE" and "READY" indicator lights in the instrument cluster - 2006 Toyota Sienna | Navigation Manual - Page 7
SIENNA (QRG_U) J Operation Procedure F Acceleration/Deceleration To accelerate: Depress the brake pedal, dynamic laser cruise control does not return to follow- up cruising or fixed speed cruising. Press the control lever upward to resume follow- up- cruising or fixed speed cruising.) F Changing - 2006 Toyota Sienna | Navigation Manual - Page 8
SIENNA (QRG_U) J Operation Procedure ), the speed set prior to cancellation will be restored. y16068q F Changing vehicle- to- vehicle distance setting You can select one of the . Each time you push the distance switch briefly, the setting changes from LONG to MIDDLE to SHORT and then back to LONG. - 2006 Toyota Sienna | Navigation Manual - Page 9
guide, dynamic laser cruise control has conventional (fixed speed) cruise control mode for cruising at fixed speeds. For the conventional cruise control mode, see Section 1- 7 in the "Owner's Manual". F Changing to the conventional cruise control mode 1 F Each mode display The control system