2006 Toyota Tacoma Owners Manual - Page 200

06 04.25 LS17020b LS17021b If you need acceleration-for example, when passing-depress the accelerator pedal enough for the vehicle to exceed the set speed. When you release it, the vehicle will return to the speed set prior to the acceleration. CAUTION For manual transmission: While driving with the cruise control on, do not shift to neutral without depressing the clutch pedal, as this may cause engine racing or overrevving. CANCELLING THE CRUISE CONTROL The cruise control may be temporarily cancelled by the driver or by the system itself under certain circumstances. Temporary cancellation allows the set cruising speed to remain in memory. The cruise control can be temporarily cancelled by doing the following: TURNING THE SYSTEM ON AND OFF To turn the cruise control on, press the "ON- OFF" button. The "CRUISE" indicator light on the instrument panel will come on to indicate that the cruise control is operational. Pressing the "ON- OFF" button again turns the system off. When the system is turned off, cruising speed must be reset when the cruise control is turned on again. SETTING THE CRUISING SPEED On vehicles with automatic transmission, the transmission must be in "D", "4" (5- speed automatic transmission) or "3" (4- speed automatic transmission) before you set the cruising speed. Bring your vehicle to the desired speed, push the lever down in the "- SET" direction and release it. This sets the vehicle at that speed. If the speed is not satisfactory, tap the lever up for a faster speed, or tap it down for a slower speed. Each tap changes the set speed by 1.6 km/h (1.0 mph). You can now take your foot off the accelerator pedal. CAUTION To avoid accidentally engaging the cruise control, turn the system off when it is not in use. Make sure the "CRUISE" indicator light is off. D Pulling the lever in the "CANCEL" direction and releasing it D Depressing the brake pedal D Depressing the clutch pedal 200 2006 TACOMA from Jan.'06 Prod. (OM35871U)