2006 Toyota Tacoma Owners Manual - Page 547

06 01.06 Lower anchorages for the child restraint systems complying with the FMVSS225 or CMVSS210.2 specifications are installed in the front passenger's seat. Front seat without seatback table- The anchorages are installed in the gap between the seat cushion and seatback of the seat as shown in the illustration. Front seat with seatback table- The anchorages are installed in the seat cushion of the seat. Rear seat- The anchorages are located at the base of the seatback as shown in the illustration. Child restraint systems complying with the FMVSS213 or CMVSS213 specification can be fixed to these anchorages. In this case, it is not necessary to fix the child restraint system with a seat belt on the vehicle. CHILD RESTRAINT INSTALLATION 10th lock position 1st lock position LS13160a SYSTEM LS13082 1. Front seat-Fold down the front seat seatback and back to the 1st lock position (most upright position) until it locks into place. Adjust the seatback to the 10th lock position. Make sure the seatback is locked securely. Canada only Front seat without seatback table (type A) 2006 TACOMA from Jan.'06 Prod. (OM35865U) 125