2006 Toyota Tundra Owners Manual - Page 146

'06 TUNDRA_U (L/O 0508) -Installation with child restraint lower anchorages (standard cab models) 2. Fix the child restraint system with the seat belt. Latch the hook onto the anchorages and tighten the top strap. For instructions to install the child restraint system, see "Child restraint" in this Section. CAUTION Make sure the top strap is securely latched, and check that the child restraint system is secure by pushing and pulling it in different directions. Follow all the installation instructions provided by its manufacturer. 3. Replace the head restraint. Lower anchorages for the child restraint systems complying with the FMVSS225 or CMVSS210.2 specifications are installed in the front seat. The anchorages are installed in the gap between the seat cushion and seatback of the right side of the seat as shown in the illustration. Child restraint systems complying with the FMVSS213 or CMVSS213 specification can be fixed to these anchorages. In this case, it is not necessary to fix the child restraint system with a seat belt on the vehicle. 146 2006 TUNDRA from Oct. '06 Prod. (OM34458U)