2006 Toyota Tundra Owners Manual - Page 151

'06 TUNDRA_U (L/O 0508) Cap For owners in Canada The symbol on a child restraint system indicates the presence of a lower connector system. CHILD RESTRAINT INSTALLATION Type A- Covers Type B- 1. Turn up the covers for left lower anchorage on the center position of the seats and for anchorages on the left side position of the seat, and remove the cap for the right lower anchorage of the center position of the seat as shown in the illustration. 2. Widen the clearance gap the seat cushion and seatback slightly and confirm the position of the lower anchorages below the button and cap in the seat cushion. 3. Latch the buckles onto the anchorages. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap" in this Section.) For installation details, refer to the instruction manual equipped with each product. SYSTEM 1. Turn up the covers for left lower anchorage on the center position of the seats and for anchorages on the left side position of the seats, and remove the cap for the right lower anchorage of the center position of the seat as shown in the illustration. 2. Widen the gap between the seat cushion and seatback slightly and confirm the position of the lower anchorages below the button and cap in the seat cushion. 3. Latch the hooks of lower straps onto the anchorages and tighten the lower straps. Canada only Type B 151 2006 TUNDRA from Oct. '06 Prod. (OM34458U)