2006 Toyota Tundra Owners Manual - Page 489

'06 TUNDRA_U (L/O 0508) Recommended oil viscosity: Front SAE 75W−90 Rear Standard differential Synthetic oil SAE 75W−140 Limited−slip differential Above −18_C (0_F) SAE 90 Below −18_C (0_F) SAE 80W or 80W−90 CHASSIS LUBRICATION (Four −wheel drive models) Propeller shafts: Spiders Lithium base chassis grease, NLGI No.2 Double cardan joint Molybdenum−disulfide lithium chassis grease, NLGI No.2 base BRAKES Minimum pedal clearance when depressed with the force of 490 N (50 kgf, 110 lbf) with the engine running, mm (in.): Without vehicle stability control system 95 (3.7) With vehicle stability control system 80 (3.1) Pedal free play, mm (in.): 1-6 (0.04-0.24) Pad wear limit, mm (in.): 1.0 (0.04) Lining wear limit, mm (in.): 1.0 (0.04) Parking brake adjustment: Pedal type-when depressed with the force of 300 N (30.6 kgf, 67.1 lbf) 8-10 clicks Lever type-when pulled with the force of 200 N (20.4 kgf, 45 lbf) 19-25 clicks Fluid type: SAE J1703 or FMVSS No.116 DOT 3 STEERING Wheel free play: Less than 30 mm (1.2 in.) Power steering fluid type: Automatic transmission fluid DEXRONr II or III Slide yokes Lithium base chassis grease, NLGI No.2 or Molybdenum−disulfide lithium base chassis grease, NLGI No.2 489 2006 TUNDRA from Oct. '06 Prod. (OM34458U)