2006 Toyota Tundra Owners Manual - Page 60

'06 TUNDRA_U (L/O 0508) CAUTION When returning seats to their original position, observe the following precautions in order to prevent personal injury in a collision or sudden stop: D Be careful not to get your hands or feet pinched in the seat. D Make sure the seat is securely locked by pushing forward and rearward on the top of the seatback or by trying to pull up the edge of the bottom cushion. Failure to do so will prevent the seat belt from operating properly. 2. Take the holding strap out of its hole, and hook the strap onto the assist grip. Then, pull the strap on the free end to secure the seat. When returning the rear seat to its original position, put the holding strap into the hole. WHEN RETURNING THE REAR SEATS If you cannot raise the seatback because of the locked seat belt, do not try it forcibly. Release the lock of the seat belt in the following way. Push in the lower front edge of the seatback cushion to slacken the seat belt (1) and let the seat belt retract a little (2). D Make sure the seat belts are not twisted or caught in the seatback and are arranged in their proper position and are ready to use. CAUTION When tumbling the rear seats, fix the seats securely by adjusting the length of the holding strap. Failure to do so may cause an unexpected accident or severe injury in the event of emergency braking or a collision. 60 2006 TUNDRA from Oct. '06 Prod. (OM34458U)