2007 Toyota 4Runner Owners Manual - Page 211

06 06.07 Parking brake REPLACING TIRES AND WHEELS When replacing the tires and wheels, be sure to install tire pressure warning valves and transmitters. ID codes on the tire pressure warning valves and transmitters are registered in the tire pressure warning ECU. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code of tire pressure warning valve and transmitter. Have the ID code registered by your Toyota dealer. If the ID code is not registered, the system will not work properly. After about 1 hour, the tire pressure warning light blinks to indicate a system malfunction. CAUTION Before driving, be sure the parking brake is fully released and the parking brake reminder light is off. CY16007 When parking, firmly apply the parking brake to avoid inadvertent creeping. To set: Fully depress the parking brake pedal. For better holding power, first depress the brake pedal and hold it while setting the parking brake. To release: Depress the parking brake pedal once again. To remind you that the parking brake is set, the parking brake reminder light in the instrument panel remains on until you release the parking brake. NOTICE When the tires or tire pressure warning valves and transmitters must be replaced, have them replaced by your Toyota dealer. The tire pressure warning valves and transmitters will be affected by the installation or removal of tires. 2007 4Runner from Aug. '06 Prod. (OM35866U) 195