2007 Toyota 4Runner Owners Manual - Page 281

06 06.07 -Screen adjustment 3. "SCAN" switch When the "SCAN" switch is pushed, all the files in a current folder will be scanned. Only the first 10 seconds of each file are played sequentially until all the files are scanned. When the switch is pushed for at least 0.8 seconds, the first 10 seconds of each initial file of all the folders in the disk will be played sequentially until the entire initial files are scanned. To stop scanning, push the switch again. 4. "FLD " switch Operate the joystick up and down to select Brightness, Contrast, Tone, or Color and left and right to make adjustments. − or "Red" Brightness Contrast Darkens Weakens the contrast Weakens the tone Strengthen s the red color + or "Green" Brightens Strengthen s the contrast Strengthen s the tone Strengthen s the green color You can adjust the color, contrast, tone and brightness of the screen. Push the "DISPLAY" button on the controller and the "Display" screen will appear. The screen may turn purple to deflect the sunlight. This is not a malfunction. Z18030 When the switch is pushed, the initial file of the next folder will be played. 5. " FLD" switch When the switch is pushed, the initial file of the previous folder will be played. 6. "DETAIL" switch When the switch is pushed while a track is played, the detailed file information of the track will be displayed. Tone Color 2007 4Runner from Aug. '06 Prod. (OM35866U) 265