2007 Toyota 4Runner Owners Manual - Page 327

06 06.07 6. Test the operation of the HomeLinkR by pressing the newly programmed button. Check to see if the gate/device operates correctly. 7. Repeat steps 1 through 6 for each remaining HomeLinkR button to program another device. Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance. Reprogramming a button Individual HomeLinkR buttons cannot be erased, however, to reprogram a single button, follow the procedure "Programming the HomeLinkR". (b) Operating the HomeLinkR To operate the HomeLinkR, press the appropriate HomeLinkR button to activate the programmed device. The HomeLinkR indicator light should come on. The HomeLinkR continues to send the signal for up to 20 seconds as long as the button is pressed. (c) Erasing the entire HomeLinkR memory (all three programs) To erase all previously programmed codes at one time, press and hold down the 2 outside buttons for 20 seconds until the indicator light flashes. If you sell your vehicle, be sure to erase the programs stored in the HomeLinkR memory. For additional programming assistance with your HomeLinkR Universal Transceiver call the: D The Toyota Customer Experience Center at 1−800−331−4331 (U.S.A.) Centre at 1−888−869−6828 (Canada) CY19133 D Toyota Canada Customer Interaction Refer to HomeLinkR on the internet at: WWW.HOMELINK.COM 2007 4Runner from Aug. '06 Prod. (OM35866U) 311