2007 Toyota 4Runner Owners Manual - Page 400

06 06.08 -Raising your vehicle CY40051 CY40052 CY40054 Front of vehicle Put a jack handle, jack handle extensions and jack handle end together as shown in the illustration. 1. Jack handle end 2. Jack handle extensions 3. Jack handle When connecting the jack handle extension(s) and jack handle end, use the jack handle to tighten the square head bolt. Make sure that the bolt fits into the depression on the joint. When connecting the jack handle extension with the jack handle, tighten the round head bolt by hand. NOTICE 6. After making sure that no one is in the vehicle, as the jack touches the vehicle and begins to fit, double−check that it is properly positioned. Rear side only- When positioning the jack under the rear axle housing, make sure the groove on the top of the jack fits with the rear axle housing. Tighten the square head bolt securely. Otherwise, the extension may come off and it may damage the paint or vehicle body. 384 2007 4Runner from Aug. '06 Prod. (OM35866U)