2007 Toyota 4Runner Owners Manual - Page 401

06 06.08 -Changing wheels CAUTION Never get under the vehicle when the vehicle is supported by the jack alone. CY40058 CY40022 7. Raise the vehicle high enough so that the spare tire can be installed. Remember you will need more ground clearance when putting on the spare tire than when removing the flat tire. To raise the vehicle, insert the jack handle end into the jack (it is a loose fit) and turn it clockwise with the handle. 8. Remove the wheel nuts and change tires. Lift the flat tire straight off and put it aside. Roll the spare wheel into position and align the holes in the wheel with the bolts. Then lift up the wheel and get at least the top bolt started through its hole. Wiggle the tire and press it back over the other bolts. 2007 4Runner from Aug. '06 Prod. (OM35866U) 385