2007 Toyota Camry Navigation Manual - Page 176

Finish AUDIO SYSTEM D Presetting a channel 1. Tune in the desired channel. D Selecting a channel Tune in the desired channel using one of the following methods. Preset tuning: Touch the channel selector button (1 - 6) for the channel you want. The button (1 - 6) is highlighted and channel number appears on the display. To select channel within the current category: Push the " " or " " button of "SEEK·TRACK". The radio will step up or down the channel within the current channel category. Touch "TYPE SEEK". The radio will step up the channel within the current channel category. 2. Touch one of the channel selector buttons (1 - 6) and hold it until a beep is heard. This sets the channel to the touch−screen button and the name and number of the channel appears on the touch−screen button. Each touch−screen button can store three SAT channels. To change the preset channel to a different one, follow the same procedure. The preset channel memory is cancelled when the power source is interrupted by battery disconnection or a blown fuse. To scan the currently selected channel category: Touch "TYPE SCAN" or push the "SCAN" button briefly. "SCAN" appears on the display. The radio will find the next channel in the same channel category, stay there for a few seconds, and then scan again. To select a channel, touch "TYPE SCAN" or push the "SCAN" button a second time. To scan the preset channels: Push the "SCAN" button and hold it until you hear a beep. "P.SCAN" appears on the display. The radio will find the next preset channel, stay there for a few seconds, and then move to the next preset channel. To select a channel, push the "SCAN" button a second time. 160