2007 Toyota Camry Owners Manual - Page 353

'07Camry_U (L/O 0608) (b) Emergency start (vehicles with smart key system) When the engine does not start, the following procedure can be used to start the engine if the vehicle's starting system and "ENGINE START STOP" switch function normally. 1. Put the transmission in "P". 2. Set the ignition switch to ACC by pushing the "ENGINE START STOP" switch once. 3. Push and hold the "ENGINE START STOP" switch for about 15 seconds while depressing the brake pedal firmly. Even if the engine can be started using the above procedure, the system may be malfunctioning. Have the vehicle checked by your Toyota dealer. If the engine cannot be started using the above procedure, immediately contact your Toyota dealer. (c) Starting a flooded engine CAUTION Do not place any objects close to the "ENGINE START STOP" switch. If the object pushes on the switch, an unexpected engine start may result. If the engine will not start, your engine may be flooded because of repeated cranking. With key cylinder −type ignition switch-If this happens, turn the key to "START" with the accelerator pedal fully depressed. Keep the key and accelerator pedal in these positions for 15 seconds and release them. Then try starting the engine with your foot off the accelerator pedal. With smart key system-If this happens, press the "ENGINE START STOP" switch (engine switch) with the brake pedal and the accelerator pedal fully depressed, and hold the "ENGINE START STOP" switch for about 30 seconds. Then the cranking hold function stops cranking automatically, and you can try starting the engine with your foot off the accelerator pedal. If the engine does not start, wait a few minutes and try again. If the engine still will not start, it needs adjustment or repair. Call a Toyota dealer or qualified repair shop for assistance. 337 2007MY CAMRY from Oct. '06 Prod. (OM33748U)