2007 Toyota Camry Navigation Manual - Page 175

AUDIO SYSTEM To select a desired disc: Push and hold the " " or " " switch until you hear a beep to change to the next or the previous disc. Repeat this operation until you reach the disc you want to listen to. 3 "MODE" switch Each time you push the "MODE" switch, the system changes the audio mode. To turn the audio system on, push the "MODE" switch. To turn the audio system off, push and hold the "MODE" switch until you hear a beep. Audio system operating hints NOTICE To ensure correct audio system operations: D Be careful not to spill beverages over the audio system. D Do not put anything other than on appropriate discs into the CD changer. D The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction. Radio reception Usually, the problem with radio reception does not mean there is a problem with your radio − it is just the normal result of conditions outside the vehicle. For example, nearby buildings and terrain can interfere with FM reception. Power lines or telephone wires can interfere with AM signals. And of course, radio signals have a limited range, and the farther you are from a station, the weaker its signal will be. In addition, reception conditions change constantly as your vehicle moves. Here are some common reception problems that probably do not indicate a problem with your radio: FM Fading and drifting stations - Generally, the effective range of FM is about 40 km (25 miles). Once outside this range, you may notice fading and drifting, which increase with the distance from the radio transmitter. They are often accompanied by distortion. Multi−path - FM signals are reflective, making it possible for two signals to reach your antenna at the same time. If this happens, the signals will cancel each other out, causing a momentary flutter or loss of reception. VI 175