2007 Toyota Highlander Navigation Manual - Page 161

AIR CONDITIONING - Windshield defogging and defrosting (b) Climate control To increase the interior temperature, press the "Ɯ" side, to decrease it, press the "Ɲ" side. Use the "TEMP" button to set the desired vehicle interior temperature. The "TEMP" selector button is used to set the desired interior temperature. If quick heating or cooling is desired - Push the "TEMP" button on either side and hold it until the maximum figure or minimum figure appears. When this button is pressed, air flows mainly from the windshield vents and the FRESH mode is automatically set. This setting clears the front view more quickly. It is not possible to return to RECIRCULATE in this mode. To remove interior fog on the windshield - Push the windshield air flow button. To remove frost or exterior fog on the windshield - 1. Push the "TEMP" button to set the maximum temperature. 2. Push the windshield air flow button. 3. Touch the fan speed control switch on the right side to obtain a maximum air flow. 4. Leave the "A/C" switch off. When the windshield air flow button is pushed, air flows mainly from the windshield vents and turns on the defogging function with the purpose of clearing the front view. Pushing this button once again returns the air flow mode to the last one used. Touch the "A/C" switch for dehumidified heating or cooling. This setting clears the front view more quickly. CAUTION Do not use the windshield air flow button during cooled air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up blocking your vision. 161