2007 Toyota Highlander Owners Manual - Page 338

'07 HIGHLANDER HV_U (L/O 0608) Before starting the hybrid system 1. Check the area around the vehicle before getting in. 2. Adjust seat position, seatback angle, seat cushion angle, seat height, head restraint height and steering wheel angle. 3. Adjust the inside and outside rear view mirrors. 4. Lock all side doors and back door. 5. Fasten seat belts. When you get in the vehicle, check whether the "READY" light is on or not. How to start the hybrid system- (a) Before starting 1. Apply the parking brake firmly. 2. Turn off unnecessary lights and accessories. 3. Put the selector lever in "P". 4. Depress the brake pedal and hold it to the floor until driving off. As the hybrid system starts only with the transmission in the "P" position, put the selector lever in "P" whenever starting the system. (b) Starting the hybrid system CAUTION Your vehicle does not produce any noise or vibration when the vehicle is ready to be driven with the "READY" indicator light on. Move your foot carefully from the brake pedal to the acceleration pedal when driving. Before starting the hybrid system, be sure to follow the instructions in "(a) Before starting". Starting procedure With your foot off the accelerator pedal, turn the key to "START" briefly and firmly. After a few seconds, the "READY" light will come on and a beep will sound. If the ambient temperature is low, such as during winter driving conditions, it may take time until the "READY" light comes on. The engine may not start even with the "READY" light on. 324 2007 HIGHLANDER HV from July '06 Prod. (OM48685U)