2007 Toyota Land Cruiser Owners Manual - Page 187

NOTICE z Do not use liquid sealants for a flat tire as tire pressure warning valve and transmitter will be damaged. z When the tires must be repaired or replaced, have them repaired or replaced by the nearest Toyota dealer or an authorized tire dealer. The tire pressure warning valves and transmitters will be affected by the installation or removal of tires. D If the ID code on the tire pressure warning valves and transmitters is not registered. D If electronic devices or facilities using 16C522a similar radio nearby. wave frequencies are D If a radio set at similar frequencies is in use in the vehicle. D If a window tint that affects the radio wave signals is installed. D If the tire pressure warning select switch is set to a different tire setting. IF THE TIRE PRESSURE LIGHT BLINKS...WARNING D If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. If the tire pressure warning light blinks when the ignition switch is turned to the "ON" position, the tire pressure warning system is not working properly. The system will be disabled in the following conditions: (When the condition becomes normal, the system will work properly.) D If non−genuine Toyota wheels are used. D If tire chains are used. D If the spare tire is in a location subject to poor radio wave signal reception. D If the tire inflation pressure is 500 kpa (5.1 kgf/cm2 or bar, 73 psi) or more higher than the specified level. If the tire pressure warning light blinks frequently when the ignition switch is turned to the "ON" position, have it checked by your Toyota dealer. D If tires not equipped with tire pressure warning used. valves and transmitters are 159