2007 Toyota Land Cruiser Owners Manual - Page 199

Selecting the high mode- Push the height select switch on the " " side when the vehicle speed is under about 30 km/h (19 mph). To change the normal mode to high, push the switch once. To change the low mode to high, push the switch twice. It takes about 30 seconds until the low mode changes to the high mode. Selecting the normal mode- To change the high mode to normal, push the height select switch on the " " side once. To change the low mode to normal, push the height select switch on the " " side once. Selecting the low mode- Push the height control switch on the " " side while the vehicle is stopped. To change the high mode to low, push the switch twice. To change the normal mode to low, push the switch once. NOTICE Do not select the low mode in the bumpy roads. If the underbody of the vehicle touches the rugged road surface, the vehicle may be damaged. Even if the engine is stopped while the vehicle height is being lowered, the operation continues for up to 12 seconds. (e) Turning off the active height control suspension To turn off the active height control suspension with the vehicle stopped, push the height control switch. The height control "OFF" indicator light comes on and the vehicle height is fixed in the same mode as the height control switch is pushed. This status is memorized in the system even after the engine is stopped. If you push the switch again, the height control "OFF" indicator light goes out and the active height control suspension is turned on. 171