2007 Toyota Land Cruiser Owners Manual - Page 50

Power windows You can set or cancel the automatic unlocking functions: Be sure to apply the parking brake when performing the following operations. To select the unlocking linked with the shift position: 1. Close all doors and turn the ignition switch to the "ON" position. 2. Shift the selector lever to the "P" position. 3. Within 10 seconds of turning the ignition switch to the "ON" position, press and hold the driver's side power door lock switch in the unlock position for 5 seconds and then release. The doors will be locked and unlocked to indicate that the function is set. To cancel the function, do the above operation again. To select the unlocking linked with the ignition switch: 1. Close all doors and turn the ignition switch to the "ON" position. 2. Shift the selector lever from "P" to the "N" position. 3. Within 10 seconds of turning the ignition switch to the "ON" position, press and hold the driver's side power door lock switch in the unlock position for 5 seconds and then release. The doors will be locked and unlocked to indicate that the function is set. To cancel the function, do the above operation again. 12C010a The windows can be operated with the switch on each side door. The power windows work when the ignition switch is in the "ON" position. Key off operation: If both front doors are closed, they work for 45 seconds even after the ignition switch is turned off. They stop working when either front door is opened. OPERATING THE DRIVER'S WINDOW Use the switch on the driver's door. Normal operation: The window moves as long as you hold the switch. To open: Lightly push down the switch. To close: Lightly pull up the switch. 22