2007 Toyota Prius Owners Manual - Page 367

Before starting the hybrid system 1. Check the area around the vehicle before entering it. 2. Adjust seat position, seatback angle, head restraint height and steering wheel angle. 3. Adjust the inside and outside rear view mirrors. 4. Lock all doors. 5. Fasten seat belts. When you get in the vehicle, check whether the "READY" light is on or not. How to start the hybrid system- (a) Before starting the hybrid system 1. Apply the parking brake firmly. 2. Turn off unnecessary lights and accessories. 3. Depress the brake pedal and hold it to the floor until driving off. (b) Turning on the hybrid system (Using the smart function-on some models) 40p102b CAUTION Your vehicle does not produce any noise or vibration when the vehicle is ready to be driven with the "READY" light on. Move your foot carefully from the brake pedal to the acceleration pedal when driving. Before starting the hybrid system, be sure to follow the instructions in "(a) Before starting the hybrid system". Normal starting procedure Carry the key and press the "POWER" switch briefly and firmly with the brake pedal depressed. The "READY" light starts blinking. After a few seconds, the blinking "READY" light remains on and two beeps sound. (If the ambient temperature is low, such as during winter driving conditions, it may take time until the "READY" light is on.) The engine may not start even with the "READY" light on. 350