2007 Toyota Sienna Owners Manual - Page 19

07 SIENNA_U (L/O 0612) -Opening and closing back door (type B only) Opening operation can be performed by the switch under the following conditions only: -Activating alarm D The back door is unlocked. D The power back door system is on. (The "BACK DOOR OFF" switch on the instrument panel is pushed out.) D The key is not in the ignition switch. D The back door is between the fully− closed position and half−opened position. Push and hold the back door open switch on the wireless remote control transmitter for about one second. The power back door opens and closes completely. When closing or opening the back door, two beeps will be heard and the turn signal lights will flash twice. Closing operation can be performed by the switch under the following conditions only: Pushing and holding the alarm switch blows the horn intermittently and flashes the headlights, tail lights and turns on the front personal lights. The alarm switch is used to deter vehicle theft when you witness anyone attempting to break into or damage your vehicle. The alarm will last for one minute. To stop alarm midway, do the following: D The power back door system is on. (The "BACK DOOR OFF" switch on the instrument panel is pushed out.) D The key is not in the ignition switch. D The back door is between the fully− opened position and half−opened position. The back door operation by the wireless remote control can be changed or disabled. For details, contact your Toyota dealer. D Push any of the switch on the wireless remote control transmitter. D Lock or unlock either front doors or back door with the key. D Turn the ignition key from the "LOCK" to "ON" position. 19 2007 SIENNA from Oct. '06 Prod. (OM45437U)