2007 Toyota Sienna Owners Manual - Page 222

07 SIENNA_U (L/O 0612) CAUTION To avoid accidentally engaging the cruise control, turn the system off when it is not in use. Make sure the "CRUISE" indicator light is off. TURNING THE SYSTEM ON AND OFF To turn the cruise control on, press the "ON−OFF" button. The "CRUISE" indicator light on the instrument panel will come on to indicate that the cruise control is operational. Pressing the "ON−OFF" button again turns the system off. When the system is turned off, cruising speed must be reset when the cruise control is turned on again. When the ignition is turned off, the system is also automatically turned off. To use cruise control again, press the "ON−OFF" button again to turn it on. SETTING THE CRUISING SPEED The transmission must be in "D" or "4" before you set the cruising speed. Bring your vehicle to the desired speed, push the lever down in the "− SET" direction and release it. This sets the vehicle at that speed. If the speed is not satisfactory, tap the lever up for a faster speed, or tap it down for a slower speed. Each tap changes the set speed by 1.6 km/h (1.0 mph). You can now take your foot off the accelerator pedal. 222 2007 SIENNA from Oct. '06 Prod. (OM45437U)