2007 Toyota Sienna Owners Manual - Page 230

07 SIENNA_U (L/O 0612) When the ignition is turned off, all the preset data is cleared. When you use the dynamic laser cruise control again, you need to reset the data. CAUTION To avoid accidentally engaging the cruise control, turn the system off when it is not in use. Make sure the "CRUISE" indicator light is off. TURNING THE SYSTEM ON AND OFF To turn the dynamic laser cruise control on, turn the "ON−OFF" button on. The "CRUISE" and "READY" indicator lights on the instrument panel will come on to indicate that the vehicle−to−vehicle distance control mode is operational. Pressing the "ON−OFF" button again turns the system off. When the system is turned off, cruising speed and vehicle−to−vehicle distance must be reset when the vehicle−to−vehicle distance control mode is turned on again. When the ignition is turned off, the system is also automatically turned off. To use dynamic laser cruise control again, press the "ON−OFF" button again to turn it on. SETTING THE CRUISING SPEED The transmission must be in "D" or "4" before you set the cruising speed. Bring your vehicle to the desired speed, push the lever down in the "− SET" direction and release it. This sets the vehicle at that speed. At this time, the display indicates settings such as the preset vehicle speed, whether a vehicle is present ahead and selected vehicle−to−vehicle distance. If there is no vehicle detected ahead, the display does not indicate the vehicle ahead. You can now take your foot off the accelerator pedal. 230 2007 SIENNA from Oct. '06 Prod. (OM45437U)