2007 Toyota Sienna Owners Manual - Page 231

07 SIENNA_U (L/O 0612) If you need to accelerate-for example, when passing-depress the accelerator pedal enough for the vehicle to exceed the preset speed. When you release the accelerator pedal, the vehicle will return to the control prior to acceleration. You cannot set a desired speed if the master warning light comes on, the alarm sounds and the display indicates one of the warning codes "E1", "E2" or "E3". If any of the above codes appears on the display, see "VEHICLE−TO−VEHICLE DISTANCE CONTROL MODE FAILURE WARNING" on page 235. CANCELLING VEHICLE−TO−VEHICLE CONTROL MODE THE DISTANCE Under certain circumstances, the vehicle− to−vehicle distance control mode is temporarily cancelled: RESUMING THE VEHICLE−TO−VEHICLE DISTANCE CONTROL MODE If the vehicle−to−vehicle distance control mode is temporarily cancelled, the cruising speed and vehicle−to−vehicle distance can be resumed by pushing the lever up in the "+ RES" direction. Vehicle speed must be above 40 km/h (25 mph). During follow−up cruising, if there are no vehicles ahead because they have changed lanes, your vehicle will accelerate gradually up to the preset speed. At this time, pushing the lever up in the "+ RES" direction will quickly speed up your vehicle in vehicle−to−vehicle distance control mode. D When vehicle speed falls below 40 km/h (25 mph) D When vehicle stability control is activated The "READY" indicator light comes on to indicate that the system is still in operation. To turn the system off, press the "ON− OFF" button. Make sure the "CRUISE" indicator light is off. If one of the warning codes "E1", "E2" or "E3" appears on the display, the preset speed automatically cancels out. See "VEHICLE−TO−VEHICLE DISTANCE CONTROL MODE FAILURE WARNING" on page 235. If the vehicle−to−vehicle distance control mode automatically cancels out other than for the above cases, have your vehicle checked by your Toyota dealer at the earliest opportunity. The vehicle−to−vehicle distance control mode may be temporarily cancelled by the driver or by the system itself under certain circumstances. Temporary cancellation allows the set cruising speed and vehicle− to−vehicle distance to remain in memory. The vehicle−to−vehicle distance control mode can be temporarily cancelled by doing the following: D Pulling the lever in the "CANCEL" direction and releasing it D Depressing the brake pedal 231 2007 SIENNA from Oct. '06 Prod. (OM45437U)