2007 Toyota Sienna Owners Manual - Page 237

07 SIENNA_U (L/O 0612) D Do not use the conventional mode in the following conditions, or serious injury or death could result: To help maintain maximum control of your vehicle, do not use conventional cruise control mode when using dynamic laser cruise control while driving in heavy or varying traffic, or on slippery (rainy, icy or snow−covered) or winding roads. Be careful about vehicle speed as it may increase when driving downhill with the conventional cruise control mode selected. However, once the vehicle−to−vehicle distance control mode activates and is used, it cannot be changed to the conventional cruise control mode using the above operation. To change the mode, press the "ON−OFF" button to turn the system off and then press it again to turn it on. Next push the lever in the "MODE" direction for longer than about 1 second. To change to the vehicle−to−vehicle distance control mode from the conventional cruise control mode, push the lever in the "MODE" direction for longer than about 1 second. TURNING THE SYSTEM ON AND OFF To turn the conventional cruise control mode on, turn the "ON−OFF" button on. The "CRUISE" and "READY" indicator lights on the instrument panel will come on. Push the lever in the "MODE" direction for longer than 1 second to change to conventional cruise control mode. The indicator on the instrument panel is as shown. You can now set the cruising speed. Pressing the "ON−OFF" button again turns the system off. When the system is turned off, cruising speed must be reset when the conventional cruise control mode is turned on again. CAUTION To avoid accidentally engaging the cruise control, turn the system off when it is not in use. Make sure the "CRUISE" indicator light is off. 237 2007 SIENNA from Oct. '06 Prod. (OM45437U)