2007 Toyota Sienna Owners Manual - Page 31

07 SIENNA_U (L/O 0612) Switches on the center pillar: "PWR DOOR" switch-To operate each side door Opening operation can be performed by the switches under the following conditions: Closing operation can be performed by the switches under the following conditions: D The power sliding door system is on. (The "SLIDE DOOR OFF" switch is pushed out.) D The sliding door is unlocked. D The power sliding door system is on. (The "SLIDE DOOR OFF" switch is pushed out.) D The sliding door is between the fully− opened position and half−opened position. Left and right side power sliding door models-The left side power sliding door does not operate when the fuel filler door is opened. The length of time required to push the switches for operating the sliding door can be changed. For details, contact your Toyota dealer. D The sliding door is between the fully− Center pillar closed position and half−opened position. OPERATING WITH THE POWER SLIDING DOOR SWITCHES To open the door, push the switch. To close the door, push the switch once again. The door opens and closes completely. Switches on the front overhead console: " " " switch-To operate the left side " switch-To operate the right side D When the ignition key is in the "ON" position, the transmission selector lever must be in "P". D The child−protector is unlocked. (switches on the center pillar only) CAUTION If you shift the automatic transmission selector lever out of "P" and accelerate before the power sliding door is closed completely, the sliding door may reverse to the open position. A child or others could fall out of the vehicle and be injured. Always make sure the power sliding door is closed and latched before you start driving. door (type B only) door 31 2007 SIENNA from Oct. '06 Prod. (OM45437U)