2007 Toyota Sienna Owners Manual - Page 347

07 SIENNA_U (L/O 0612) CALIBRATING THE COMPASS (deviation calibration) The direction display on the compass deviates from the true direction determined by the earth's magnetic field. The angle of deviation varies according to the geographic position of the vehicle. To adjust for this deviation; 1. Stop the vehicle in a level place and switch the display to the outside temperature. (To switch to this mode, see "-Outside temperature and cruise information display" on page 344.) The compass sensor is on the roof of the vehicle. 2. Push and hold both the "MODE" and "E/M" buttons simultaneously for 5 seconds until the "VAR" indication appears on the compass display. 3. Push the "E/M" button several times until the desired zone number appears on the compass display. If the button is not pushed for 10 seconds, the display returns to the compass/ outside temperature mode and the number that is last set is memorized. To select the zone where the vehicle is currently located, refer to the following map. NOTICE Do not put magnets or a metal object on or near the roof of the vehicle. Doing this may cause malfunction of the compass sensor. 347 2007 SIENNA from Oct. '06 Prod. (OM45437U)