2007 Toyota Sienna Owners Manual - Page 40

07 SIENNA_U (L/O 0612) OPERATING WITH THE WIRELESS REMOTE CONTROL TRANSMITTER To open or close the door, push and " switch on the wireless hold the " remote control transmitter about one second. (Only when the power back door system is on.) For details, see "Wireless remote control" on page 14 in this Section. ASSISTS CLOSING BY HAND When the power back door system is on (the "BACK DOOR OFF" switch is pushed out), if you move the back door about 10-15 cm (4-6 in.) from its fully−opened position, the back door will automatically and completely close. When the power back door system is off, the back door can be closed manually. The assisting function when closing the back door can be disabled and the assisting function when opening the back door can be added. For details, contact your Toyota dealer. Before operating the power back door, make sure there is nobody near the back door. The resistance must be as strong as the force of the moving door, or stronger. As the back door approaches the fully−closed or fully−opened position, its moving force increases significantly. The jam protection function may not work if something gets caught just before the back door is fully closed. If the back door receives a strong impact, this function may operate even if nothing is caught. JAM PROTECTION FUNCTION If anything with sufficient resistance obstructs the power back door while it is closing or opening, the back door will automatically reverse to the opposite direction. If the jam protection function operates continuously at the closing operation more than 2 times, the back door will be stopped at that position. 40 2007 SIENNA from Oct. '06 Prod. (OM45437U)