2007 Toyota Sienna Owners Manual - Page 87

07 SIENNA_U (L/O 0612) -Installing seconds seat (center seat) NOTICE z Avoid putting heavy loads on the removed seat. The metallic tips of the seat leg may be damaged and the seat cannot be reinstalled. z Do not carry the removed seat with holding the seat position adjusting lever. Front of the vehicle When you install the second seats, be sure to place it where the seat is originally positioned because each second seat is not interchangeable. You can distinguish the original seat position by the position of the front seat leg pin and the shape of the seat striker bezel in the floor. The second center seat has a pin in the inside of the right front leg as shown in the illustration. CAUTION You must install the seat in proper position to wear the seat belt properly. Failure to be properly restrained with the seat belt in an accident can cause death or serious injury. Refer to the label on the side of the seat for additional installation instructions. NOTICE You must install the seat in its original position. If it is installed in the wrong position, the seat lock or bezel will be damaged. 87 2007 SIENNA from Oct. '06 Prod. (OM45437U)