2007 Toyota Tacoma Owners Manual - Page 140

06 09.29 -Installation with child restraint lower anchorages (regular cab models) CAUTION D When returning the seatback to its LS13068 original position, make sure the seatback is securely locked by pushing forward and rearward on the top of the seatback. Failure to do so will prevent the seat belt from operating properly. LS13078 D Make sure the top strap is securely latched, and check that the child restraint system is secure by pushing and pulling it in different directions. Follow all the installation instructions provided by its manufacturer. 3. Fix the child restraint system with the seat belt and tighten the top strap. Replace the head restraint. For instructions on installing the child restraint system, see "Child restraint" on page 95 in this Section. Separate seats only Lower anchorages for Child Restraint Systems equipped with hook or buckle type attachments are installed in the front passenger seat. The anchorages are installed in the gap between the seat cushion and seatback of the front passenger seat as shown in the illustration. Child Restraint Systems equipped with hook or buckle type attachments can be installed using these anchorages. For such systems, it is not necessary to use the vehicle seatbelts. 126 2007 TACOMA from Sep. '06 Prod. (OM35877U)