2007 Toyota Tundra Owners Manual - Page 167

07 04.26 CHILD RESTRAINT INSTALLATION SYSTEM CAUTION 1. Widen the gap between the seat cushion and seatback slightly and confirm the position of the lower anchorages near the button on the seatback. 2. Type A-Latch the hooks of lower straps onto the anchorages and tighten the lower straps. Type B-Latch the buckles onto the anchorages. D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages or that the seat belt is not caught. D Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. XS13096 For owners in Canada-The symbol on a child restraint system indicates the presence of a lower connector system. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap" on page 141 in this Section.) For installation details, refer to the instruction manual equipped with each product. D After securing the child restraint system, never lift up the seat cushion. D Do not install a child restraint system on the rear seat if it interferes with the lock mechanism of the front seats. Otherwise, the child or front seat occupant(s) may be killed or seriously injured in case of sudden braking or a collision. Canada only Type B 2007 TUNDRA from Jul. '07 Prod. (OM34463U) 149