2007 Toyota Tundra Owners Manual - Page 393

07 04.26 -Receiving a phone call Display "995734" Repeat the above procedure until the entire number that you want to dial is input. Go back operation- You say: "Go back" Voice output: "Go back, numbers entered have been Push the talk switch and adding numbers otherwise go back, or delete." Display: "995" Repeating the above operation deletes the last digits in reverse order of input. Delete operation- You say: "Delete" Voice output: "Deleted. The entire number to dial has been deleted. Please push the talk switch and say the number." Display: "Dial by Num" The display will return to the initial screen that allows a number to be input. the last removed. continue say dial, Cancel operation- Do either one of the following: z Push the on−hook switch at anytime during the operation. z Push the talk switch and say "Cancel" after the beep at anytime during the operation except while a call in connected. When receiving a phone call, a ring tone is audible and the system changes into the telephone mode. When receiving a phone call, the display is as follows. The display differs depending on whether or not the vehicle is in motion. When the vehicle is stopped: Number, name, or "Incoming" is displayed. When the vehicle is in motion: "Incoming" is displayed. Do either one of the following: D Pushing the off −hook switch allows you to talk on the phone. D Pushing the on−hook switch refuses the call. To adjust the ring volume, push "+" or " −" on the steering volume controls. Volume adjustment cannot be done using the audio system. Repeatedly pushing " −" on the steering volume controls mutes the ring. When receiving an international phone call, the name of the party may not be displayed correctly depending on the cellular phone. 2007 TUNDRA from Jul. '07 Prod. (OM34463U) 375