2007 Toyota Tundra Owners Manual - Page 504

07 04.26 SERVICE CONNECTOR BRAKE CONTROLLER package) Connector cover FOR TOWING (with towing TIRES D Ensure that your vehicle's tires are properly inflated. See page 548 in Section 7−2 and page 586 in Section 8 for instructions. Your vehicle is equipped with a service connector for the trailer brake controller as shown. Access the service connector. 1. Remove the scuff plate. 2. Remove the clip (screw type) and trim board. Remove the connector cover from the service connector before connecting the connector. Link the connector to the trailer brake controller via the sub wire harness stored in the glove box. The detailed explanation of the sub wire harness circuit is packed together with the sub wire harness. Be sure to position the trailer brake controller where it does not prevent the driver from operating the pedal. Toyota recommends that the sub wire harness be stored in the glove box when it is not in use. D The trailer tires should be inflated to the pressure recommended by the trailer manufacturer in respect to the gross trailer weight. XS30014a Scuff plate Trim board Clip 486 2007 TUNDRA from Jul. '07 Prod. (OM34463U)