2007 Toyota Tundra Owners Manual - Page 72

07 04.26 -Folding front passenger's seat (Regular cab models) 3. SEATBACK SWITCH ANGLE ADJUSTING Move the control switch in the desired direction. Releasing the switch will stop the seatback at that position. XS13209 XS13160 CAUTION Avoid reclining the seatback any more than needed. The seat belts provide maximum protection in a frontal or rear collision when the driver and the front passenger are sitting up straight and well back in the seats. If you are reclined, the lap belt may slide past your hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt. In the event of a frontal collision, the more the seat is reclined, the greater the risk of death or serious injury. 4. SEAT LUMBER SUPPORT ADJUSTING SWITCH Push the switch on either side. The amount of lumbar support will change while the switch is pushed. BEFORE FOLDING PASSENGER'S SEAT FRONT 1. Push the seat belt hanger down as far as it will go when it is in the raised position. 2. Make sure the shoulder belt passes through the hanger when folding the front passenger's seat. This prevents the shoulder belt from being damaged. CAUTION The seat belt must be removed from the hanger when the seat belt is in use. 54 2007 TUNDRA from Jul. '07 Prod. (OM34463U)