2008 Toyota 4Runner Owners Manual - Page 172

07 12.25 Headlights and turn signals (with automatic light control system) HEADLIGHTS To turn on the following lights: Twist the headlight/turn signal lever knob. Position 1-Parking, tail, license plate, side marker and instrument panel lights CY14036 For Canada-The tail light indicator (green light) on the instrument panel will tell you that the tail lights are on. Position above 2-Headlights and all of the CY14031 For the U.S.A. For the U.S.A.-The headlight low beam indicator light (green light) on the instrument panel will tell you that the low beams are on. Position 3 ("AUTO")-Headlights and/or all of the lights in position 1 They automatically turn on or off depending on the darkness of the surroundings. The automatic light control sensor is on the top of the driver's side instrument panel. Do not place anything on the instrument panel, and/or do not affix anything on the windshield to block this sensor. The operating condition or sensitivity can be changed. For details, contact your Toyota dealer. Automatic light cut off system Position 1 or position 3 with the tail lights on- The lights automatically turn off when the driver's door is opened with the engine switch in the "ACC" or "LOCK" position. CY14037 Manually twist the knob to the position 2 to turn on the headlights if they are needed immediately when entering a dark tunnel, parking structure, etc. For Canada 130