2008 Toyota 4Runner Owners Manual - Page 230

07 12.25 At this time, the slip indicator light will come on, the downhill assist control system indicator light flash and the downhill assist control system stops operating temporarily in order to protect the brake actuator. (Although the downhill assist control system does not operate, it is no problem to continue your driving.) The system will be automatically restored after a short time and the slip indicator light and the downhill assist control system indicator light go out. "VSC OFF" warning light When the system is normal and the engine switch is turned to "ON", the warning light will come on and will go off after a few seconds. CY16074 It is not a malfunction that the warning light may stay on for 60 seconds after the engine switch is turned to the "ON" position. Depressing the brake pedal repeatedly may turn on the light. It is normal if it goes out after a few seconds. If there is any abnormality in the system, the "VSC OFF" warning light will flash. When the "DAC" switch is pushed, the downhill assist control system indicator light also flash. If the "VSC OFF" warning light flashes, there may be an abnormality in any of the following systems in addition to the downhill assist control system. If the warning light flashes while driving, the system does not work. However, as normal braking operates when being applied, it is no problem to continue your driving. In the following cases, contact your Toyota dealer: D The warning light does not come on after the engine switch is turned to "ON". D Hill−start assist control system D Active traction control system D Vehicle stability control system D The warning light remains on after the engine switch is turned to "ON". D The warning light flashes while driving. 188