2008 Toyota 4Runner Owners Manual - Page 67

07 12.25 -Automatic door locking and unlocking functions AUTOMATIC DOOR LOCKING You can select the following functions: To select the locking linked with the shift position: 1. Close all doors and turn the engine switch to the "ON" position. 2. Shift the selector lever to the "P" position. 3. Within 10 seconds of turning the engine switch to the "ON" position, press and hold the driver's side power door lock switch in the lock position for 5 seconds and then release. The doors will be locked and unlocked to indicate that the function is set. To cancel the function, do the above operation again. To select the locking linked with the vehicle speed: 1. Close all doors and turn the engine switch to the "ON" position. 2. Shift the selector lever from "P" to the "N" position. 3. Within 10 seconds of turning the engine switch to the "ON" position, press and hold the driver's side power door lock switch in the lock position for 5 seconds and then release. The doors will be locked and unlocked to indicate that the function is set. To cancel the function, do the above operation again. D Locking linked with the shift position All doors are automatically locked when the selector lever is moved out of "P" position. D Locking linked with vehicle speed All doors are automatically locked when the vehicle speed goes above about 20 km/h (12 mph). You can set or cancel the automatic door locking functions: Be sure to apply the parking brake when performing the following operations. 25