2008 Toyota Land Cruiser Owners Manual - Page 221

2-4. Using other driving systems STEP 9 Shift the four-wheel drive control switch to "L4", then shift to "H4" again. When shifting the four-wheel drive control switch, push the switch down while turning it. The low speed four-wheel drive indicator light will flash slowly (turns on and off every 2 seconds). STEP 10 Shift the shift lever to "P". Shifting to the neutral position is completed with above procedure. The unengaged "Park" warning light will turn on when the shift lever is shifted to the "P" position. To return to "H4" when the vehicle is in this condition, carry out the following procedure. 2 When driving n Shifting from neutral position to "H4" STEP 1 Stop the vehicle completely. Make sure the vehicle is stopped in a safe place while carrying out the following procedure. STEP 2 STEP 3 Set the parking brake firmly. Turn the "ENGINE START STOP" switch to the IGNITION ON mode. Do not start the engine at this time. STEP 4 Depress the brake pedal firmly. Keep the brake pedal depressed till the end of the procedure. STEP 5 STEP 6 Shift the shift lever to "N". Shift the four-wheel drive control switch to "L4", and then shift to "H4" again. When shifting the four-wheel drive control switch, push the switch down while turning it. The low speed four-wheel drive indicator light will turn off. Shifting to "H4" is completed when the low speed four-wheel drive indicator light turns off. 193