2008 Toyota RAV4 Owners Manual - Page 132

'08 Rav4_U (L/O 0802) -Installation with child restraint lower anchorages TO USE BRACKET: THE CENTER ANCHOR 2. Fix the child restraint system with the seat belt. Latch the hook onto the anchor bracket and tighten the top strap. For instructions to install the child restraint system, see "Child restraint" on page 85 in this Section. 1. Open the lid of the anchor bracket. Lower anchorages for the child restraint systems complying with the FMVSS225 or CMVSS210.2 specifications are installed in the rear/second seat. The anchorages are installed in the gap between the seat cushion and seatback of both outside rear/second seating position. Child restraint systems complying with the FMVSS213 or CMVSS213 specification can be fixed to these anchorages. In this case, it is not necessary to fix the child restraint system with a seat belt on the vehicle. CAUTION Make sure the top strap is securely latched, and check that the child restraint system is secure by pushing and pulling it in different directions. Follow all the installation instructions provided by its manufacturer. 104 2008 RAV4 from Feb. '08 Prod. (OM42726U)