2008 Toyota RAV4 Owners Manual - Page 134

'08 Rav4_U (L/O 0802) 2. Widen the gap between the seat cushion and seatback slightly and confirm the position of the lower anchorages near the buttons on the seatback. 3. Type A-Latch the hooks of lower straps onto the anchorages and tighten the lower straps. Type B-Latch the buckles onto the anchorages. For owners in Canada-The symbol on a child restraint system indicates the presence of a lower connector system. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap" on page 100 in this Section.) For installation details, refer to the instruction manual equipped with each product. CAUTION D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages or that the seat belt is not caught. D Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. D When using the lower anchorages for the child restraint system, ensure that the seat is moved to the rear −most position, with the seatback close to the child restraint system. D After securing the child restraint system, never slide or recline the seat. D Do not install a child restraint system on the rear seat if it interferes with the lock mechanism of the front seats. Otherwise, the child or front seat occupant(s) may be killed or seriously injured in case of sudden braking or a collision. 106 2008 RAV4 from Feb. '08 Prod. (OM42726U)