2008 Toyota Sienna Owners Manual - Page 206

08 SIENNA_U (L/O 0801) -Power rear view mirror control Vehicles with the auto anti −glare inside rear view mirror-On some models, when the inside rear view mirror surface darkens in "AUTO" mode, the outside rear view mirror surface also darkens to reduce the reflection of the headlights of the vehicle behind you. (For details, see "Auto anti −glare inside rear view mirror" on page 167 in this Section.) On some models, when you push the rear window defogger switch, the heater panels in the outside rear view mirrors will quickly clear the mirror surface. (See "Rear window and outside rear view mirror defoggers and windshield wiper de−icer" on page 184 in Section 1 −5.) To adjust a mirror, use the switches. 1. Master switch-To select the mirror to be adjusted Push the switch to "L" (left) or "R" (right). 2. Control switch-To move the mirror Push the switch in the desired direction. Mirrors can be adjusted when the engine switch is in the "ACC" or "ON" position. Vehicles with the driving position memory system-The position of the outside rear view mirrors and driver's seat can be memorized. For details, see "Driving position memory system" on page 65 in Section 1−3. Type A CAUTION NOTICE If ice should jam the mirror, do not operate the control or scrape the mirror face. Use a spray de−icer to free the mirror. D Do not adjust the mirror while the vehicle is moving. Doing so may cause the driver to mishandle the vehicle and an accident may occur resulting in death or serious injuries. D On some models, since the mirror surfaces can get hot, do not touch them when the defogger switch is on. Type B 165 2008 SIENNA from Aug. '08 Prod. (OM45455U)