2008 Toyota Sienna Owners Manual - Page 526

08 SIENNA_U (L/O 0801) -Positioning the jack D When jacking up the vehicle, turn off the power sliding door system and the power back door system, and close the sliding door and the back door completely. -Raising your vehicle 5. Position the jack at the correct jack point as shown. Make sure the jack is positioned on a level and solid place. 6. After making sure that no one is in the vehicle, raise it high enough so that the spare tire can be installed. Remember you will need more ground clearance when putting on the spare tire than when removing the flat tire. To raise the vehicle, insert the jack handle into the jack (it is a loose fit) and turn it clockwise. As the jack touches the vehicle and begins to lift, double −check that it is properly positioned. 485 2008 SIENNA from Aug. '08 Prod. (OM45455U)