2008 Toyota Sienna Navigation Manual
2008 Toyota Sienna Manual
2008 Toyota Sienna manual content summary:
- 2008 Toyota Sienna | Navigation Manual - Page 1
help ...Map screen operation ...Current position display ...Screen scroll operation ...Switching the screens ...Map scale ...Foot print map ...Orientation of the map ...Example of navigation system operation ...Guiding the route ...Registering home ... 19 - 2008 Toyota Sienna | Navigation Manual - Page 2
is set at ACC or ON, the initial screen will be displayed and the system will begin operating. Under extremely cold conditions, the display may react slowly or operation sound may become louder. CAUTION When the vehicle is stopped with the engine running, always apply the parking brake for safety - 2008 Toyota Sienna | Navigation Manual - Page 3
system informs about when to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check screen will change back to "CAUTION" screen and then change to - 2008 Toyota Sienna | Navigation Manual - Page 4
a name, or entering a memo, letters and numbers can be input via the touch screen. INFORMATION Key layout can be changed. (See "D Input key layout" on page 102.) INFORMATION D If the system does not respond to a touch on a touch screen button, move the finger away from the screen and then touch it - 2008 Toyota Sienna | Navigation Manual - Page 5
BASIC FUNCTIONS D To input letters To display the alphabet keys, touch "A−Z" or On certain letter entry screens, letters can be entered in upper or lower case. D To input numerals and symbols To display the number keys and symbol keys, touch "0−9". " ". : Enter letters by touching the alphabet - 2008 Toyota Sienna | Navigation Manual - Page 6
The number of matching items is shown to the right side of the screen. If the number of matching items is more than 9,999, the system displays on the screen. To shift to the next or previous page. To scroll up or down one item at a time. This expresses a displayed screen - 2008 Toyota Sienna | Navigation Manual - Page 7
BASIC FUNCTIONS If appears to the right of the item name, the complete name is too long for the display. Touch to scroll to the end of the name. Touch to scroll to the beginning of the name. D Sorting The order of a list displayed on the screen can be rearranged. TYPE A 1. Touch "Sort by". 2. - 2008 Toyota Sienna | Navigation Manual - Page 8
BASIC FUNCTIONS TYPE B Function help Explanations for the functions of the "Destination", "Setup", and "Menu" screens can be viewed. : "Dist. Sort": To sort in the order of distance from the current vehicle location. The distance from current vehicle position up to the destination is displayed to - 2008 Toyota Sienna | Navigation Manual - Page 9
. As soon as the system receives signals from the GPS, the correct current position is displayed. D To correct the current position manually, see "D Current position/tire change calibration" on page 107. The current vehicle position mark ( ) appears in the center or bottom center of the map screen - 2008 Toyota Sienna | Navigation Manual - Page 10
/VOICE" button is pushed, the current vehicle position mark returns to the center of the screen and the map moves as the vehicle proceeds along the vehicle position map location display. Touch "Enter ". The screen changes and displays the map location of the selected destination and the route - 2008 Toyota Sienna | Navigation Manual - Page 11
on a POI icon, the name and "Info." are displayed on the top of the screen. The registered point is shown by on the map. To change the icon or name, etc., see " - Editing memory points" on page 90. Up to 106 memory points can be registered. If there is an attempt - 2008 Toyota Sienna | Navigation Manual - Page 12
and "Info." are displayed on the top of the screen. If there is already a set destination, "Add to " and "Replace " are displayed. "Add to ": To add a destination. "Replace ": To delete the existing destinations and set a new one. To edit a memory point, touch "Edit". (See " - Editing memory points - 2008 Toyota Sienna | Navigation Manual - Page 13
BASIC FUNCTIONS DESTINATION INFORMATION When the cursor is set on a destination icon, the name and "Info." are displayed on the top of the screen. - Switching the screens Any one of the screen configurations can be selected. Information such as the name, address, and phone number are displayed. - 2008 Toyota Sienna | Navigation Manual - Page 14
BASIC FUNCTIONS Depending on the conditions, certain screen configuration buttons cannot be selected. : To display the single map screen. (See page 32.) : To display the dual map screen. (See page 32.) : - 2008 Toyota Sienna | Navigation Manual - Page 15
normally. By continuing to touch the touch screen button, the scale bar changes smoothly. The scale of the map display can be changed by touching the scale bar directly. It is not available while driving. The map scale is displayed under the north− up symbol or heading−up symbol at the top left - 2008 Toyota Sienna | Navigation Manual - Page 16
is contained, when the map scale is changed to 150 feet (50 m), changes to . - Foot print map For the (25 m). D To switch to the foot print map changes into when the map is scaled down to 150 feet (50 by the foot print map, the screen scale automatically changes to 150 feet (50 m). D On the foot - 2008 Toyota Sienna | Navigation Manual - Page 17
BASIC FUNCTIONS D To display building information Information is available only for buildings for which information is recorded on the map disc. 2. Using an eight−direction arrow, move the cursor to the position of the building to display building information. 3. Touch "Building Info.". 1. Touch " - 2008 Toyota Sienna | Navigation Manual - Page 18
the map The orientation of the map can be changed from north−up to heading−up by touching the of vehicle travel is always up. A red arrow indicates North. Example of navigation system operation - - Guiding the route Guidance to a destination occurs by specifying the destination using the "POI - 2008 Toyota Sienna | Navigation Manual - Page 19
BASIC FUNCTIONS 2. Touch "POI Name". INFORMATION There are 13 different methods to search destinations. (See "Destination search" on page 42.) 3. Enter the name of the destination. Every touch on a letter key narrows the selection. Letters that cannot be selected in the database are dimmed out. - 2008 Toyota Sienna | Navigation Manual - Page 20
". The system starts route search and displays recommended routes. 6. Touch "Guide". Route guidance starts. Guidance is done by both the screen and voice. (See "Route guidance screen" and "Typical voice guidance prompts" on pages 66 and 68.) INFORMATION It is possible to change - 2008 Toyota Sienna | Navigation Manual - Page 21
BASIC FUNCTIONS 3. Touch "Register". 5. Enter the house number. 6. Enter the street name. Every touch on a letter key narrows the selection. Letters that cannot be selected in the database are dimmed out. When there are four or fewer database items, these items are displayed in a list. Even if - 2008 Toyota Sienna | Navigation Manual - Page 22
complete and the "Memory Point" screen is displayed. Registered "Home" information will be displayed. The icon, quick access, name, location, and phone number can be changed. (See " - Editing memory points" on page 90.) 40 - 2008 Toyota Sienna | Navigation Manual - Page 23
DESTINATION SEARCH SECTION DESTINATION SEARCH Destination search 2 42 42 45 45 45 50 53 56 57 57 58 58 59 60 61 61 Destination search ...Selecting the search area ...Destination search by Home ...Destination search by Quick access ...Destination search by "Address" ...Destination search by "POI∗ - 2008 Toyota Sienna | Navigation Manual - Page 24
slow. - Selecting the search area SELECTING THE SEARCH AREA ON THE DESTINATION SCREEN 1. Push the "DEST" button. Push the "DEST" button. 2. Touch "Change" on the "Destination" screen to display a map of the United States and Canada divided into 12 areas. (For map database information and updates - 2008 Toyota Sienna | Navigation Manual - Page 25
DESTINATION SEARCH SELECTING THE SEARCH AREA ON THE INPUT SCREEN Change the search area in order to set a destination from a different area by using "Address", "POI Name", "Freeway Ent./Exit", or "Intersection". 3. Touch one of "US1" - 2008 Toyota Sienna | Navigation Manual - Page 26
DESTINATION SEARCH U.S.A. Button "US1" "US2" States included in the search area Idaho Oregon Washington California Nevada Arizona Colorado Montana New Mexico Utah Wyoming Iowa Kansas Minnesota Missouri North Dakota Nebraska South Dakota Oklahoma Texas Illinois Indiana Kentucky Michigan Ohio - 2008 Toyota Sienna | Navigation Manual - Page 27
Guidance starts from the current vehicle position to your home if "Enter" is touched even while driving. 2. Touch any of the quick access touch screen buttons on the "Destination" screen. The screen changes and displays the map location of the quick access point and the route preference. (See - 2008 Toyota Sienna | Navigation Manual - Page 28
" to display the screen for inputting a street name. 3. When the desired street name is found, touch the corresponding touch screen button. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 61.) If the same - 2008 Toyota Sienna | Navigation Manual - Page 29
the listed items by inputting the city name. If inputting a street name first, the screen changes. The house number can then be input. If the same address exists in more than one city, the current screen changes to the city list screen. If the above screen appears, an address range on the - 2008 Toyota Sienna | Navigation Manual - Page 30
, the following three methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities 2. Input a city name. INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 48 - 2008 Toyota Sienna | Navigation Manual - Page 31
house number and a street name" on page 46.) 2. Touch the touch screen button of the desired city name from the displayed list. The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on page 46.) Touch the touch - 2008 Toyota Sienna | Navigation Manual - Page 32
the "Destination" screen. 3. Input the name of the Point of Interest. 4. Touch the touch screen button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 61.) When inputting the - 2008 Toyota Sienna | Navigation Manual - Page 33
are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities 2. Input the city name. INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 3. Touch the touch screen button of the desired city name - 2008 Toyota Sienna | Navigation Manual - Page 34
DESTINATION SEARCH SELECTING FROM THE NEAREST 5 CITIES 1. Touch "Nearest 5 Cities". SELECTING FROM THE LAST 5 CITIES (b) Selecting from the categories 2. Touch the touch screen button of the desired city name. Touch the touch screen button of the desired city name. If the navigation has not be - 2008 Toyota Sienna | Navigation Manual - Page 35
". When the desired category is touched, the POI name list screen is displayed. 2. Input the city center name. 3. Set the search point by the following method: 1. Input the city center 2. Set the current position as the search point 3. Set the search point via the map screen 4. Set the search - 2008 Toyota Sienna | Navigation Manual - Page 36
DESTINATION SEARCH SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch "Current Position". The search point is set at the current position, and the "POI Category" screen will be displayed. SETTING THE SEARCH POINT VIA THE MAP SCREEN 1. Touch "Map". When an arrow facing the desired point is - 2008 Toyota Sienna | Navigation Manual - Page 37
DESTINATION SEARCH SETTING THE SEARCH POINT FROM DESTINATIONS 1. Touch the destination buttons at the bottom of the screen. D To search POIs near the search point When the search point is set, the "POI Category" screen will be displayed. When an arrow facing the desired point is touched, the map - 2008 Toyota Sienna | Navigation Manual - Page 38
"Emergency" 1. Push the "DEST" button. 2. Touching "Emergency" on the "Destination" screen. The display changes to a screen to select police stations, dealers, hospitals or fire stations. While driving, only nearby police stations, dealers, hospitals, or fire stations are shown. The current position - 2008 Toyota Sienna | Navigation Manual - Page 39
Touch the touch screen button of the desired destination. The screen changes and displays the map location of the selected destination and the route "Previous" on the "Destination" screen. INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page 223 - 2008 Toyota Sienna | Navigation Manual - Page 40
the "DEST" button. 2. Touch "Intersection" on the "Destination" screen. The screen changes and displays the map location that was previously displayed just before the destination input operation and Guidance starts if "Enter" is touched even while driving. However, the cursor cannot be moved. 58 - 2008 Toyota Sienna | Navigation Manual - Page 41
and the route preference. (See "Starting route guidance" on page 61.) If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected destination and - 2008 Toyota Sienna | Navigation Manual - Page 42
Select the desired freeway by touching the touch screen button. 5. Touch the touch screen button of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 61.) "Input Name": An - 2008 Toyota Sienna | Navigation Manual - Page 43
match for the telephone number inputted, a list of identical numbers with different area codes will be displayed. 3. Input a telephone number. 4. After inputting a telephone number, touch "OK". The screen changes and displays the map location of the selected destination and the road preference. (See - 2008 Toyota Sienna | Navigation Manual - Page 44
system starts route search and displays recommended routes. If there is already a set destination, "Add to " and "Replace " are displayed. "Add to ": To add a destination. "Replace ": To delete the existing destinations and set a new one. "Route Preference": To change .) D If "Guide" is touched until - 2008 Toyota Sienna | Navigation Manual - Page 45
to obey traffic regulations and keep road conditions in mind while driving. If a traffic sign on the road has been changed, the route guidance may provide incorrect information. D To change the route before starting guidance ROUTE PREFERENCE 1. You can change route preference by touching "Route - 2008 Toyota Sienna | Navigation Manual - Page 46
road Freeway Ferry 2. Touch "Quick1", "Quick2" or "Short" to select the desired route. "Quick1": Recommended route. This route is indicated by an orange line. "Quick2": Alternative route. This route is indicated by a purple line. 64 - 2008 Toyota Sienna | Navigation Manual - Page 47
and time to destination ...Setting and deleting destination ...Adding destinations ...Reordering destinations ...Deleting destinations ...Setting route ...Search condition ...Detour setting ...Route preference ...Starting route from adjacent road ...Map view ...Display POI* icons ...Route overview - 2008 Toyota Sienna | Navigation Manual - Page 48
guidance, various types of guidance screens can be displayed depending on conditions. D Screen layout INFORMATION D If the vehicle goes off the road that should not be traveled on. D During freeway driving During freeway driving, the freeway information screen will be displayed. This screen - 2008 Toyota Sienna | Navigation Manual - Page 49
ROUTE GUIDANCE : : : To scroll for farther junctions or exits. To scroll for closer junctions or exits. To scroll for the closest three junctions or exits. D When approaching a freeway exit or junction When the vehicle approaches an entrance, exit, or junction, the guidance screen for the freeway - 2008 Toyota Sienna | Navigation Manual - Page 50
ROUTE GUIDANCE D Other screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching turn list. during guidance displays the ARROW SCREEN On this screen, information about next turns on the guidance route can be viewed. during guidance displays the - 2008 Toyota Sienna | Navigation Manual - Page 51
circle." "In a quarter of a mile, traffic circle ahead, and then 3rd exit ahead." "The 3rd exit ahead." "The exit ahead." (Beep sound only) ∗: 2 The system indicates a U−turn if the distance between two one−way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 - 2008 Toyota Sienna | Navigation Manual - Page 52
To adjust the voice guidance volume, see "Volume" on page 85. The system announces the approach to the final destination. 1 2 Distance and time to destination the distance and the direction of the destination are displayed. When driving on the guidance route and more than one destination is set, - 2008 Toyota Sienna | Navigation Manual - Page 53
time. Setting and deleting destination - - Adding destinations Adding destinations and searching again for the routes can be done. Displayed while driving off the guidance route. The destination direction is indicated by an arrow. INFORMATION 2. Touch the number button to display the desired - 2008 Toyota Sienna | Navigation Manual - Page 54
Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 4. Touch the desired "Add previously input number. 4. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. - 2008 Toyota Sienna | Navigation Manual - Page 55
set destination can be deleted. Setting route - - Search condition You can designate the route conditions of the route to the destination. 1. Touch "Route". touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. 1. Touch " - 2008 Toyota Sienna | Navigation Manual - Page 56
. "Whole Route": By touching this touch screen button, the system will calculate an entire new route to the destination. The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To change a route. (See pages 71 and 73.) 2. Touch "Detour". 74 - 2008 Toyota Sienna | Navigation Manual - Page 57
, the detour distance selections are 5, 15, and 25 miles (km). D The system may not be able to calculate a detour route depending on the selected distance and surrounding road conditions. 2. Touch "Route Preference" to change the conditions which are to determine the route to the destination. 75 - 2008 Toyota Sienna | Navigation Manual - Page 58
ROUTE GUIDANCE - Starting route from adjacent road You can start the route guidance from the adjacent road. (ex. When route guidance is set on the freeway, but the vehicle is driven parallel along the freeway.) Map view - - Display POI icons Points of Interest such as gas stations and restaurants - 2008 Toyota Sienna | Navigation Manual - Page 59
for the nearest Point of Interest, touch this touch screen button. The system will list the points within 20 miles (32 km). (See page 78 screen with a limited choice of Points of Interest will be displayed. (To change the displayed POI, see page 104.) Select the desired POI categories. The - 2008 Toyota Sienna | Navigation Manual - Page 60
ROUTE GUIDANCE D To display the local POI list Points of Interest that are within 20 miles (32 km) of the current position will be listed from among the selected categories. Select the desired POI categories from the list. The selected category icon appears on the top left of the screen. By - 2008 Toyota Sienna | Navigation Manual - Page 61
set as a destination. The map will shift so that the icon is centered on the screen and overlaps with the cursor . At this time, the distance route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (See pages 71 and 73.) "Turn List - 2008 Toyota Sienna | Navigation Manual - Page 62
requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street name closest to the starting point will be displayed with the mileage to the next turn. These marks indicate the direction in which you should turn at an - 2008 Toyota Sienna | Navigation Manual - Page 63
. : To preview the route to the next destination in fast−forward mode. : To stop the preview. : To review the route to the previous destination or starting point. : To review the route to the previous destination or starting point in fast− forward mode. : To indicate the previous destination or - 2008 Toyota Sienna | Navigation Manual - Page 64
ROUTE GUIDANCE 82 - 2008 Toyota Sienna | Navigation Manual - Page 65
ADVANCED FUNCTIONS SECTION ADVANCED FUNCTIONS Advanced functions Descriptions of functions for more effective use 4 Suspending and resuming guidance ...84 Volume ...85 User selection ...86 My places ...88 Registering memory points ...89 Editing memory points ...90 Deleting memory points ...94 - 2008 Toyota Sienna | Navigation Manual - Page 66
the "MENU" button. 2. Touch "Resume Guidance". The screen will return to the current position map without route guidance. 1. Push the "MENU" button. The screen will change to the current position map with route guidance. 2. Touch "Suspend Guidance". 84 - 2008 Toyota Sienna | Navigation Manual - Page 67
, the voice guidance continues even if the navigation screen is changed to other screens. "Adaptive Volume Control": By turning "Adaptive vehicle speed exceeds 50 mph (80 km/h). To turn the "Adaptive Volume Control" system on, touch the button. The indicator will be highlighted. 2. Touch "Volume". - 2008 Toyota Sienna | Navigation Manual - Page 68
ADVANCED FUNCTIONS User selection The system can memorize the following settings for up to three users. D Map direction D Map scale D Map configuration D Guidance mode D Setup D Volume D Language D Route trace D Travel time/ - 2008 Toyota Sienna | Navigation Manual - Page 69
ADVANCED FUNCTIONS When a touch screen button that is already registered is touched, the following screen appears. D To change user D To delete user Touch "User number". To replace, touch "Yes". To cancel the re. placement, touch "No" or 1. Touch "Delete". The confirmation screen will be - 2008 Toyota Sienna | Navigation Manual - Page 70
ADVANCED FUNCTIONS My places - Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. (See " - Destination search by Home" on page 45 and " - Destination search by Quick access" on page 45.) Registered areas are avoided at the time of route - 2008 Toyota Sienna | Navigation Manual - Page 71
ADVANCED FUNCTIONS 8 9 10 Deletes previous points. (See " - Deleting previous points" on page 99.) Number of remaining memory points Number of remaining areas to avoid - Registering memory points 1. Push the "MENU" button. 2. Touch "My Places". 5. Touch "OK". To edit registered information, see " - 2008 Toyota Sienna | Navigation Manual - Page 72
, attribute, name, location and/or telephone number of a registered memory point can be edited. 1. Push the "MENU" button. 2. Touch "My Places". D To change "Icon" 1. Touch "Icon" on the "Memory Point" screen. 3. Touch "Edit". 5. Touch the touch screen button to be edited. "Icon": To select icons - 2008 Toyota Sienna | Navigation Manual - Page 73
ICONS When the vehicle approaches the memory point, the selected sound will be heard. 1. Touch "with Sound" on the "Change Icon" screen. D To change "Quick Access" It is possible to change attributes of the quick access points. Memory points with a set attribute can be used as a "Quick Access" or - 2008 Toyota Sienna | Navigation Manual - Page 74
ADVANCED FUNCTIONS 2. Touch the desired attribute. It is possible to replace a registered attribute. DELETING "Quick Access" D To change "Name" 1. Touch "Name" on the "Memory Point" screen. 1. Touch "Del.". 3. To replace the attribute, touch "Yes". To return to the previous screen, touch "No" or - 2008 Toyota Sienna | Navigation Manual - Page 75
MEMORY POINT NAMES The name of a memory point that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Memory Point" screen. D To change "Phone #" (telephone number) 1. Touch "Phone #" on the "Memory Point" screen. To show the name, touch "ON" on the "Memory - 2008 Toyota Sienna | Navigation Manual - Page 76
" button. 2. Touch "My Places". 3. Touch "Delete". 3. Touch "Register". 4. Touch the touch screen button to be deleted. "Delete All": To delete all memory points in the system. 94 - 2008 Toyota Sienna | Navigation Manual - Page 77
ADVANCED FUNCTIONS - Deleting home 1. Push the "MENU" button. 2. Touch "My Places". - Registering area to avoid Areas you want to avoid because of traffic jams, construction work or other reasons can be registered as areas to avoid. 1. Push the "MENU" button. 2. Touch "My Places". 4. Enter the - 2008 Toyota Sienna | Navigation Manual - Page 78
of the area to be avoided. (See "Destination search" on page 42.) 6. Touch either or to change the size of the area to be avoided. 7. Touch "OK". INFORMATION D If a destination is input in the button. 3. Touch "Edit". 5. Set the cursor in the center of the area to avoid, and touch "Enter". 96 - 2008 Toyota Sienna | Navigation Manual - Page 79
ADVANCED FUNCTIONS D To change "Name" 1. Touch "Name" on the "Edit Area to Avoid" screen. be displayed on the map. (See page 97.) "Location": To edit area location. (See page 98.) "Area Size": To edit area size. (See page 98.) "Active": To turn on or off the area to avoid feature. To turn on the - 2008 Toyota Sienna | Navigation Manual - Page 80
" on the "Edit Area to Avoid" screen. D To change "Area Size" 1. Touch "Area Size" on the "Edit Area to Avoid" screen. - Deleting area Touch "Enter". The previous screen will be displayed. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be - 2008 Toyota Sienna | Navigation Manual - Page 81
deletion, touch "No". 3. Touch "Delete Previous Points". 4. Touch the touch screen button you want to delete. "Delete All": To delete all previous points in the system. 99 - 2008 Toyota Sienna | Navigation Manual - Page 82
ADVANCED FUNCTIONS Setup Setting the items shown on the "Setup" screen can be done. (See page 9.) D Distance unit Distance unit can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. 3. Touch the items to be set. 4. Touch "OK". The previous screen will be displayed. - 2008 Toyota Sienna | Navigation Manual - Page 83
screen. INFORMATION D The displayed time to the destination is the approximate driving time that is calculated based on the selected speeds and the actual depending on progress along the route, which may be affected by road conditions such as traffic jams, and construction work. D It is possible - 2008 Toyota Sienna | Navigation Manual - Page 84
button. 2. Touch "Setup" on the "Menu" screen. " "ABC" type 3. Touch "ABC" or "QWE" of "Keyboard Layout" to choose the Input key layout. 3. Touch "Change" of "Time Zone". The "Adjust Time Zone" screen will be displayed on the display. " "QWE" type The selected button is highlighted. 4. Touch "OK - 2008 Toyota Sienna | Navigation Manual - Page 85
"OFF". 5. Touch "OK". 4. Touch the touch screen button to be turned off. The button becomes dimmed. To set the default, touch "Default". 5. Touch "OK". 3. Touch "Change" of " Function". 103 - 2008 Toyota Sienna | Navigation Manual - Page 86
" screen. Then touch up" screen. to display page 2 of the "Set4. Touch the category button to be changed. D Display of building shape When the "Display Building Shapes" feature is turned on, the system will display the building shape on the map screen using a scale of 150 feet (50 m) to 300 feet - 2008 Toyota Sienna | Navigation Manual - Page 87
in all modes can be heard. When the "Voice Guidance in All Modes" feature is turned off, voice guidance cannot be heard when using the audio system. To turn the "Voice Guidance in All Modes" on: 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. Then touch up" screen. to display - 2008 Toyota Sienna | Navigation Manual - Page 88
to display page 3 of the "Setup" screen. When the "Pop−up Message" is turned off, following messages are not displayed. This message appears when the system is in the POI mode and the map scale is over 0.5 mile (800 m). 3. Touch "ON" of "Pop−up Message". The selected button is highlighted - 2008 Toyota Sienna | Navigation Manual - Page 89
/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually - 2008 Toyota Sienna | Navigation Manual - Page 90
ADVANCED FUNCTIONS TIRE CHANGE CALIBRATION The tire change calibration function will be used when replacing the tires. This function will adjust the mis−calculation caused by the circumference difference between the old and new tires. If this procedure is not performed when tires are replaced, the - 2008 Toyota Sienna | Navigation Manual - Page 91
...Maintenance information setting ...Dealer setting ...Calendar with memo ...Adding a memo ...Editing a memo ...Memo list ...Hands−free system (for cellular phone) ...Speech command system ...Help screen ...Screen adjustment ...Screen setting ...Beep setting ...Select language ... V 109 - 2008 Toyota Sienna | Navigation Manual - Page 92
the vehicle needs to be serviced, the touch screen button color will change to orange. 1. Push the "INFO" button. 3. Touch the desired touch screen button. For details of each touch screen button, see "INFORMATION ITEMS" on page 111. "Delete All": To cancel all conditions which have been inputted - 2008 Toyota Sienna | Navigation Manual - Page 93
"OIL FILTER": Replace engine oil filter "ROTATION": Rotate tires "TIRES": Replace tires "BATTERY": Replace battery "BRAKE PAD": Replace brake linings "WIPERS": Replace wiper blades "LLC": Replace engine coolant "BRAKE OIL": Replace brake fluid "ATF": Replace ATF "SERVICE": Scheduled maintenance "AIR - 2008 Toyota Sienna | Navigation Manual - Page 94
OTHER FUNCTIONS - Dealer setting It is possible to register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "INFO" button. 2. Touch "Maintenance" on the "Information" screen. 3. Touch "Set Dealer" on - 2008 Toyota Sienna | Navigation Manual - Page 95
#" on the "Edit Dealer" screen. Calendar with memo - It is possible to enter memos for particular dates on the calendar. The system informs you of the memo entry when the system is turned on. (See page 21.) Memos can also be used for route guidance if the memo has been registered with - 2008 Toyota Sienna | Navigation Manual - Page 96
OTHER FUNCTIONS 2. Touch "Calendar". On this screen, the current date is highlighted in yellow. or or : To change month. : To change year. Memos can be edited by touching the list button. (See " - Editing a memo" on page 116.) "Today": To display the current month calendar (if another - 2008 Toyota Sienna | Navigation Manual - Page 97
of the mark displayed next to the date. To default the mark color, touch "Delete" on the "Mark color" screen. "Date f": To change the color of the date. To default the date color, touch "Delete" on the "Date color" screen. "Prev. Day": To go to the "Memo" screen of the previous date. "Today": To - 2008 Toyota Sienna | Navigation Manual - Page 98
OTHER FUNCTIONS - Editing a memo The registered memo can be edited. 1. Push the "INFO" button. 2. Touch "Calendar" on the "Information" screen. 3. Touch the day you want to edit a memo on the "Calendar" screen. 6. Enter text using the keys. Up to 24 letters can be entered. After entering the text, - 2008 Toyota Sienna | Navigation Manual - Page 99
edit a memo. (See " - Adding a memo" on page 115.) "Location": To change a registered location. (See " - Adding a memo" on page 115.) "Enter ": To touch "Yes". To cancel the deletion, touch "No". 4. Touch the desired search condition to list the memos. "This Week": To display the list of memos for - 2008 Toyota Sienna | Navigation Manual - Page 100
your cellular phone being connected with a cable or placed on a cradle. If your cellular phone does not support Bluetoothr, this system can not function. INFORMATION In the following conditions, the system may not function. D The cellular phone is turned OFF. D The current position is outside the - 2008 Toyota Sienna | Navigation Manual - Page 101
on unpaved road. much road noise.) D Driving at high speed. D Windows are open. D If air−conditioning vents are turned towards the microphone. D The sound of the air−conditioning fan is loud. "Microphone Indicates the condition of Bluetoothr connection. "Blue" indicates an excellent connection to - 2008 Toyota Sienna | Navigation Manual - Page 102
the following conditions and places. D Your cellular phone is hiding behind the display (behind the seat or in the glove box and console box). D Your cellular phone touches or is covered with metal materials. Leave the Bluetoothr phone on the place where "Blue" indication is displayed. Bluetooth is - 2008 Toyota Sienna | Navigation Manual - Page 103
is subject to the following two conditions: (1) This device may not cause CAUTION FCC Warning: Changes or modifications not used in accordance with the instructions, may cause harmful interference measures: −Reorient or relocate the receiving antenna. −Increase the separation between the equipment - 2008 Toyota Sienna | Navigation Manual - Page 104
the steering wheel to display this screen when the vehicle is stopped. 4. Touch "Bluetooth∗" to display the "Bluetooth∗ Settings" screen. 1. Push the "INFO" button. 3. Touch "Settings" to display "Settings" screen. 5. Touch "Register" to connect your cellular phone to the system. ∗: Bluetooth is - 2008 Toyota Sienna | Navigation Manual - Page 105
the screen into the phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch . Always set it to this mode and leave the Bluetoothr phone in a condition where connection can be established. Each time you touch "Auto Connect", auto connection - 2008 Toyota Sienna | Navigation Manual - Page 106
is turned off, you have to connect Bluetoothr manually. When the engine switch is set at ACC or ON, the selected Bluetoothr phone will be a poor reception from the Bluetoothr network when the engine switch is set at ACC or ON, the system automatically reconnects the Bluetoothr phone. In this case - 2008 Toyota Sienna | Navigation Manual - Page 107
. The system has one phone book. You can register up to 1000 numbers. This cannot be operated while driving. 2. Select the desired number from the list. V Touch the desired key to input the telephone number. 1. Touch "Phone Book" to display "Phone Book" screen. Touch or push the ing wheel. switch - 2008 Toyota Sienna | Navigation Manual - Page 108
received, the system memorizes up to 5 numbers. If it is more than 5, the oldest number is deleted. This cannot be operated while driving. D When you call by phone book, the Call" screen. Touch or push the ing wheel. switch of the steer2. Touch "Incoming Calls" to display "Incoming Calls" screen. - 2008 Toyota Sienna | Navigation Manual - Page 109
book, dialed numbers and received calls. (See page 133 for registering the speed dial.) D When a telephone number registered in the phone book such as a public telephone is not memorized in the system. Touch or push the switch of the steering wheel. D An international phone call may not be made - 2008 Toyota Sienna | Navigation Manual - Page 110
book. For setting the voice recognition, see "Setting the voice recognition" on page 145. Example: Call DAD 2. Touch the desired number to call. You can change the page by touching "Speed Dial 2" or "Speed Dial 3". When you push the telephone button while driving, the screen - 2008 Toyota Sienna | Navigation Manual - Page 111
the switch of the steering wheel. D Touch "Cancel". (Except for recognizing the command) D Say "Cancel" "Next" is displayed when multiple entries are found for a searched name. Up to 6 entries can be displayed including the first searched one. Do the following to change the entry to the next one - 2008 Toyota Sienna | Navigation Manual - Page 112
a desired number. D Sending a tone You can send a tone by giving a desired number. (vii) By POI call You: System: Push the talk switch. "After the beep, please say the number." You: "812387" System: "When ready, please briefly push the talk switch or push the off−hook switch to dial." You: Push - 2008 Toyota Sienna | Navigation Manual - Page 113
driving. When you change from cellular phone call to Hands−free call, the Hands−free screen will be displayed and you can operate it on the screen. Transferring method and behavior are different depending on the cellular phone which you have. For the operation of the phone, see the manual wheel. - 2008 Toyota Sienna | Navigation Manual - Page 114
in bank for example. You can register the phone number and the code number in the phone book. Touch the desired number to input the key. To hang up the phone: or push the switch of the Touch steering wheel. This cannot be operated while driving. If the continuous tone signal is registered in - 2008 Toyota Sienna | Navigation Manual - Page 115
tone. (For registering the speed tone, see "Registering the speed tone" on page 136.) (e) Change the settings of the Bluetoothr phone (i) Registering the speed dial You can register the desired telephone number from phone book, dialed numbers and received calls. Up to 17 speed dial numbers can be - 2008 Toyota Sienna | Navigation Manual - Page 116
OTHER FUNCTIONS 2. Touch "Register" of "Speed Dial". 4. Touch the desired telephone number. 6. If you select a touch screen button you registered before, this screen is displayed. Touch "Yes" if you want to overwrite it. 3. Select the data you want to register. 5. Touch the touch screen button - 2008 Toyota Sienna | Navigation Manual - Page 117
OTHER FUNCTIONS D Deleting the speed dial individually You can delete "01" − "17" of the speed dial individually. If you delete them all at once, all of 17 numbers are deleted. D Deleting all of the speed dial 2. Touch the touch screen button you want to delete. 1. Touch "Delete All" of "Speed - 2008 Toyota Sienna | Navigation Manual - Page 118
OTHER FUNCTIONS (ii) Registering the speed tone You can register the desired tone number. Up to 6 speed tone numbers can be registered. 3. Input the number and touch "OK". 5. If you select a touch screen button you register before, this screen is displayed. Touch "Yes" if you want to overwrite it - 2008 Toyota Sienna | Navigation Manual - Page 119
OTHER FUNCTIONS D Editing the speed tone You can edit the speed tone. 3. Use the software keyboard to input the name. 1. Touch "Edit" of "Speed Tone". 4. Input the number and touch "OK". V 2. Touch the touch screen button you want to edit. 137 - 2008 Toyota Sienna | Navigation Manual - Page 120
OTHER FUNCTIONS D Deleting the speed tone individually You can delete "1" to "6" of the speed tone. If you delete them all at once, all of 6 numbers are deleted. D Deleting all the speed tone 3. Touch "Yes". 1. Touch "Delete All" of "Speed Tone". 1. Touch "Delete" of "Speed Tone". 2. Touch "Yes - 2008 Toyota Sienna | Navigation Manual - Page 121
OTHER FUNCTIONS (iii) Setting the volume D Automatic volume settings for high speed You can set the volume one step up when the speed is over 50 mph (80 km/h). (When it is under 43 mph (70 km/h), previous volume is back.) Each time you touch "Adaptive Volume Control", you can switch on or off. D - 2008 Toyota Sienna | Navigation Manual - Page 122
screen D Receiving Call Display You can select the method of the receiving call display. D Auto answer When a call is received, the display automatically changes to the talking screen and you can start to talk on the phone (without touching any switch) after the preset time. 1. Touch "Screen" to - 2008 Toyota Sienna | Navigation Manual - Page 123
. When the engine switch is set at ACC or ON and the Bluetoothr is automatically connected, the connection check is displayed. Touch "Default". Touch "Phone Book" to display the "Phone Book Management" screen. V Touch "Yes". Touch "ON" or "OFF" of "Show Bluetooth∗ connection status at start up - 2008 Toyota Sienna | Navigation Manual - Page 124
person's data (up to 2 numbers a person) can be registered in the phone book. Transfer it while the engine is running. 2. Select the group you want to transfer to. 4. Transfer the phone book data to the system using the Bluetoothr phone. This screen appears while transferring. To cancel it, touch - 2008 Toyota Sienna | Navigation Manual - Page 125
OTHER FUNCTIONS D Registering the phone book data You can register the phone book data. When this screen is displayed, try the transfer operation again. 1. Touch "Register" of "Phone Book". 3. When you complete the edit, touch "OK". V 2. Touch the desired touch screen button to edit the phone - 2008 Toyota Sienna | Navigation Manual - Page 126
OTHER FUNCTIONS D Editing the name When you don't input the name, the number is displayed. D Editing the phone number You can register the phone number in "TEL1" and "TEL2" separately. Up to 2 numbers a person can be registered. 3. Select the desired icon. 1. Touch "Name". 1. Touch "TEL1" or " - 2008 Toyota Sienna | Navigation Manual - Page 127
OTHER FUNCTIONS D Selecting the group You can set a group for a contact (for example: "Family", "Friends", "Office"...). It will then be easier for you to find this contact when needed, by using the group display. You can select "No group" or "Group 01" to "Group 19". "No group" is displayed if you - 2008 Toyota Sienna | Navigation Manual - Page 128
OTHER FUNCTIONS D Adding the data to the phone book You can add data to the phone book. 3. Touch "PLAY" to play the voicetag. If you want to delete it, touch "Delete" and "OK". 3. Confirm the added data on the screen and touch " - 2008 Toyota Sienna | Navigation Manual - Page 129
can delete the data. When you release your car, delete all your data on the system. 3. Touch the desired touch screen button. When you edit the data, touch "OK". 1. Touch "Edit". 1. Touch "Delete" of "Phone Book". V 2. Select the data you want to edit. When you also touch "Edit" on this screen - 2008 Toyota Sienna | Navigation Manual - Page 130
OTHER FUNCTIONS 3. Touch "Yes". You can also delete it in the following way. 2. Select the desired data. 4. Touch "Yes". 3. Touch "Delete". 1. Touch "Phone Book". 148 - 2008 Toyota Sienna | Navigation Manual - Page 131
"Select Group" screen is displayed. You can also delete it in the following way. 1. Touch "Delete All" of "Phone Book". 4. Select the desired group. 1. Touch "Phone Book". V 2. Select the deleting method. Group Data ...Deleting all the phone data in group. All Contact Data ...Deleting all the - 2008 Toyota Sienna | Navigation Manual - Page 132
OTHER FUNCTIONS D Registering a group name You can register 20 groups. "No Group", "Group 01" − "Group 19" is registered by default. You can change "Group 01" − "Group 19" into desired names. 3. Touch "Yes". 2. Select the group you want to register. 1. Touch "Register" of "Group Name". 3. When - 2008 Toyota Sienna | Navigation Manual - Page 133
OTHER FUNCTIONS D Selecting a group icon D Editing a group name D Deleting a group name You can delete the group names individually or all at once. If you delete a group name, that group will return to the default setting. (excluding "No Group") 1. Touch "Icon". 1. Touch "Name". 1. Touch " - 2008 Toyota Sienna | Navigation Manual - Page 134
the log data You can delete the log data individually or all at once. When you release your car, delete all the data on the system. (a) Individually 2. Select the group you want to delete the name of. 1. Touch "Delete All" of "Group Name". 1. Touch "Delete" on the "Log Data" screen. 3. Touch - 2008 Toyota Sienna | Navigation Manual - Page 135
functions of the Hands−free system. It is useful when you leave your car with the hotel or you don't want others to see the data you registered. When you set or unlock the security, you have to input the security code. Be sure to change the default code when you use the security - 2008 Toyota Sienna | Navigation Manual - Page 136
deleting dialed numbers and received numbers. D Display of phone information screen. D Changing the security code. When you set this function, the speed dial screen is not displayed while you are driving. 3. Input the current code. Each time you touch A, an inputted digit is deleted. 5. Touch "Yes - 2008 Toyota Sienna | Navigation Manual - Page 137
OTHER FUNCTIONS D Initializing the security code You can initialize the settings. 1. Touch "ON". 1. Touch "Default". 3. Touch "Yes". V 2. Input the security code and touch "OK". 2. Input the security code and touch "OK". 155 - 2008 Toyota Sienna | Navigation Manual - Page 138
is displayed when you choose the phone. 3. Touch "OK". 1. Touch "Settings" to display "Settings" screen. Although you can register up to 6 Bluetoothr phones in the system, only one Bluetoothr phone can function at a time. When the result message is displayed, you can use the Bluetoothr phone. 156 - 2008 Toyota Sienna | Navigation Manual - Page 139
...The name of Bluetoothr phone which is displayed on the screen. You can change it into a desired name. Bluetooth∗ Device Address ...The address peculiar to the system. You cannot change it. 2. Touch "Change". Touch "Yes" or "No". V 3. When you complete the setting, touch 1. Select the desired - 2008 Toyota Sienna | Navigation Manual - Page 140
it. Passkey ...The password when you register your cellular phone in the system. You can change it into the figure of 4−8 digits. Bluetooth∗ Device Address ...The address peculiar to the system. You can not change it. If you have registered two Bluetoothr phones with the same Device Name or Passkey - 2008 Toyota Sienna | Navigation Manual - Page 141
OTHER FUNCTIONS D Initializing the Bluetoothr settings You can initialize the settings. 3. Use the software keyboard to input the Device Name. You can input up to 20 characters. 5. When you complete the setting, touch . 1. Touch "Default". V 4. Input a Passkey with 4 − 8 digits. When you touch - 2008 Toyota Sienna | Navigation Manual - Page 142
phone before you delete it and you can make sure whether the telephone you delete is correct or not. 3. Touch "Yes". 1. Touch "Delete" of phone". "Bluetooth∗ Tele- 1. Select the telephone you want to display the information about. 2. Select the telephone you want to delete and touch "OK - 2008 Toyota Sienna | Navigation Manual - Page 143
navigation system and audio system by giving a command. 2. When you complete confirming it, touch . 1. Push the talk switch. A beep sounds and on screen message is displayed with an indicator at the top left. 2. Say a command while the indicator is shown on the display. If you want to check the - 2008 Toyota Sienna | Navigation Manual - Page 144
say "Help", and displays the "Help" screen. 4. Touch "Enter" or say "Enter destination", and the system starts searching for a route to your home. (If the destination is already registered, "Add" or "Replace" is displayed on the screen.) Touch or say "Cancel", and the search will be canceled. When - 2008 Toyota Sienna | Navigation Manual - Page 145
Guide INFORMATION In the following conditions, the system may not recognize the command properly. D The command is not correct or clear. D There are background noises such as wind noise " " or " ". Touch "OK" after you check it. 1. Touch the "Operating Guide" tab on the upper side of the screen and - 2008 Toyota Sienna | Navigation Manual - Page 146
" button. INFORMATION When you do not touch any touch screen button on the "Display" screen for 20 seconds, the previous screen will be displayed. Color and tone adjustment (with rear seat entertainment system) You can adjust the color and the tone while the DVD video and video CD are being played - 2008 Toyota Sienna | Navigation Manual - Page 147
will be displayed. Depending on the position of the headlight switch, the screen changes to either day mode or night mode. To display the screen in the day headlight switch turned on, this condition is memorized in the system even with the engine turned off. 1. Push the "INFO" button. V 2. - 2008 Toyota Sienna | Navigation Manual - Page 148
transition You can select a function that enables automatic return to the navigation screen from the audio screen. (b) Switch color You can select a color of touch screen buttons. (c) Rear system lock (with rear seat entertainment system) If the vehicle is equipped with the rear seat entertainment - 2008 Toyota Sienna | Navigation Manual - Page 149
default settings: D Maintenance conditions D Maintenance information "off" setting D Memory points D Areas to avoid D Previous points D Route trace D User selection settings D Phone book data D Dialed numbers and received calls D Speed dial D Bluetoothr phone data D Security code This function is - 2008 Toyota Sienna | Navigation Manual - Page 150
The language of the touch screen buttons, pop−up messages and the voice guidance can be changed. 3. Touch "English", "Français" or "Español" to select a language. 4. Touch "OK". The language is changed and the screen returns to the map display. 1. Push the "INFO" button. 1. Push the "INFO" button - 2008 Toyota Sienna | Navigation Manual - Page 151
Finish AUDIO/VIDEO SYSTEM SECTION AUDIO/VIDEO SYSTEM Audio/video system 6 Quick reference ...170 Using your audio/video system ...171 Audio/video system operating hints ...213 VI 169 - 2008 Toyota Sienna | Navigation Manual - Page 152
Finish AUDIO/VIDEO SYSTEM Quick reference 1 2 3 4 5 6 Function menu display screen To control the radio, CD changer or DVD player, touch the touch screen buttons. For details, see page 173. " - 2008 Toyota Sienna | Navigation Manual - Page 153
some of the basic features of your audio system. Some information may not pertain to your system. Your audio system works when the engine switch is set at ACC or ON. CAUTION For vehicles sold in U.S.A. and Canada: D Part 15 of the FCC Rules FCC Warning: Changes or modifications in construction not - 2008 Toyota Sienna | Navigation Manual - Page 154
Finish AUDIO/VIDEO SYSTEM D Laser products D Do not take this unit apart or attempt to make any changes yourself. This is an intricate unit that uses a laser pickup to retrieve information from the surface of compact discs. The laser is carefully shielded so - 2008 Toyota Sienna | Navigation Manual - Page 155
that if you are listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of one group of sounds while decreasing the volume of another. 1. Push the "AUDIO" button. INFORMATION D If the system does not respond to a touch of a touch screen button, move - 2008 Toyota Sienna | Navigation Manual - Page 156
"OK". The surround function will turn on. Automatic sound levelizer (ASL): When the audio sound becomes difficult to be heard due to road noise, wind noise or other noises while driving, the system adjusts to the optimum volume according to the noise level. Select "ON" of "ASL" and touch "OK". 174 - 2008 Toyota Sienna | Navigation Manual - Page 157
Finish AUDIO/VIDEO SYSTEM (d) Selecting screen size (with rear seat entertainment system) The video screen can be changed from normal mode to wide mode. 1. Push the "AUDIO" at a time. D Never try to disassemble or oil any part of the changer. Do not insert anything other than a disc into the slot. - 2008 Toyota Sienna | Navigation Manual - Page 158
system) The sound of the rear seat entertainment system can be enjoyed by pushing the "DISC·AUX" button. (g) AUX adapter The sound of portable audio players connected to the AUX adapter can be enjoyed. Push the "DISC·AUX" button to switch to AUX mode. For details, refer to the "Owner's Manual changes - 2008 Toyota Sienna | Navigation Manual - Page 159
can store up to 6 stations. To change the preset station to a different one, follow the when the power source is interrupted by battery disconnection or a blown fuse. (c) Selecting button again. (d) Radio Data System Your audio system is equipped with Radio Data Systems (RDS). RDS mode provides - 2008 Toyota Sienna | Navigation Manual - Page 160
Finish AUDIO/VIDEO SYSTEM "TYPE A "" If the system receives no RDS stations, "NO PTY" appears on the display. Each time you touch "TYPE A" or "TYPE "", the program type changes as in the following: D ROCK D MISC (Miscellaneous) D INFORM (Information) D EASY LIS (Easy listening) D CLS/JAZZ ( - 2008 Toyota Sienna | Navigation Manual - Page 161
the radio ID when activating XMr service or when reporting a problem. If you select the "CH 000" using the "TUNE" knob, the ID code of 8 alphanumeric characters appears. If you select another channel, display of the ID code is canceled. The channel (000) alternates the display between the radio ID - 2008 Toyota Sienna | Navigation Manual - Page 162
Finish AUDIO/VIDEO SYSTEM D Listening to satellite radio D Channel category Push the "AM·SAT" button to choose either an AM station or a SAT (satellite) channel. Besides "AM", "SAT1", "SAT2" - 2008 Toyota Sienna | Navigation Manual - Page 163
Finish AUDIO/VIDEO SYSTEM D Presetting Each touch screen button can store three SAT channels. To change the preset channel to a different one, follow the same channel memory is cancelled when the power source is interrupted by battery disconnection or a blown fuse. To scan the currently selected - 2008 Toyota Sienna | Navigation Manual - Page 164
Finish AUDIO/VIDEO SYSTEM D Displaying the title and name When you touch "TEXT", the song/program title and the artist name/feature are displayed. Up to 16 alphanumeric characters - 2008 Toyota Sienna | Navigation Manual - Page 165
Finish AUDIO/VIDEO SYSTEM D If the satellite radio tuner malfunctions When problems occur with the XMr tuner, a message will appear on the display. Referring to the table below to identify the problem, take the suggested corrective action. ANTENNA The XMr antenna is not connected. Check whether - 2008 Toyota Sienna | Navigation Manual - Page 166
the instructions, supports "Audio Services" (Music and Talk) of only XMr satellite radio and "Text Information"* linked to the respective "Audio Services". *Text Information includes, Station Name, (Artist) Name, (Song) Title and Category Name. (a) Inserting discs The engine switch must be set at ACC - 2008 Toyota Sienna | Navigation Manual - Page 167
it is moving. It could damage your audio system. D Do not insert one disc stacked on top of another one or feed them in continuously, to prevent discs from getting stuck in the changer. 2. Touch "LOAD". The display opens. INFORMATION Under extremely cold conditions, the display may react slowly or - 2008 Toyota Sienna | Navigation Manual - Page 168
Finish AUDIO/VIDEO SYSTEM (b) Ejecting discs D A single disc alone: The display opens and the amber indicators at either side of the slot start blinking. After the disc is ejected, the amber indicators change to green. A disc can be inserted. D All the discs: 1. Push the "LOAD· " button. "LOAD· - 2008 Toyota Sienna | Navigation Manual - Page 169
the "DISC·AUX" button again to switch to the CD changer. If the rear seat entertainment system is on, pushing the "DISC·AUX" button switches the sound of the front audio system and that of the rear seat entertainment system. The numbers of the trays where the disc is not set are dimmed. (c) Playing - 2008 Toyota Sienna | Navigation Manual - Page 170
Finish AUDIO/VIDEO SYSTEM (d) Selecting a desired disc Touch the desired disc number on the screen. The selected disc number is highlighted. The changer will start playing the selected disc from the first track. (e) Playing an audio disc Push the "AUDIO" button to display this screen. SELECTING - 2008 Toyota Sienna | Navigation Manual - Page 171
Finish AUDIO/VIDEO SYSTEM Fast forward: Push " " side of the "SEEK/ TRACK" button is displayed, the top page is displayed. Vehicles with rear entertainment system - While the DVD player is in operation, the chapter or track can be changed by pushing either side of the "SEEK/TRACK" button. SEARCHING - 2008 Toyota Sienna | Navigation Manual - Page 172
in random order - Touch "RAND" for longer than a second while the disc is playing. "D·RAND" appears on the screen. The system selects a track on all the audio discs in the changer in random order. To cancel it, touch "RAND" once again. If a CD−TEXT disc is inserted, the title of the disc - 2008 Toyota Sienna | Navigation Manual - Page 173
Finish AUDIO/VIDEO SYSTEM SELECTING A DESIRED FOLDER "FOLDERY": Touch this touch screen button moving. Touch "FOLDER LIST". The folder list is displayed. (f) Playing a MP3/WMA disc Push the "AUDIO" button and touch a MP3/WMA disc number to display this screen. : By touching this touch screen - 2008 Toyota Sienna | Navigation Manual - Page 174
Finish AUDIO/VIDEO SYSTEM SELECTING A DESIRED FILE "SEEK/TRACK" button: Use for direct access to a desired file. Push either side of the "SEEK/TRACK" button and repeat it until - 2008 Toyota Sienna | Navigation Manual - Page 175
Finish AUDIO/VIDEO SYSTEM Touch the desired file number. The changer will start playing the selected file from the beginning. : By touching this touch screen button, the list moves - 2008 Toyota Sienna | Navigation Manual - Page 176
"RAND" to reset. (g) If the player malfunctions If "CD ERROR" appears on the screen, audio signals of the disc cannot be read or the system has trouble. Push the "DISC" button once again. If the changer does not operate, check that the disc surface is not soiled or damaged. If the disc is O.K., the - 2008 Toyota Sienna | Navigation Manual - Page 177
details. For appropriate discs for this player, see "Audio/video system operating hints" on page 213. (a) Inserting the disc The indicator light turns on while the disc is loaded. If the label faces forward, the disc cannot be played. In this case, "DISC CHECK" appears on the screen. If a disc which - 2008 Toyota Sienna | Navigation Manual - Page 178
Finish AUDIO/VIDEO SYSTEM (c) Playing a disc Push the "DISC·AUX" button if a disc is already loaded in the player. "DVD" appears on the screen. (If the CD changer is turned on, push the "DISC" button again to switch to the DVD player.) (d) Operating an audio CD PLAYING AN AUDIO CD CD text only - - 2008 Toyota Sienna | Navigation Manual - Page 179
Finish AUDIO/VIDEO SYSTEM Reverse: Touch " " side of the "SEEK/ TRACK" button and hold it to reverse the disc. When you release the button, the player will resume playing. - 2008 Toyota Sienna | Navigation Manual - Page 180
Finish AUDIO/VIDEO SYSTEM SELECTING A DESIRED FOLDER OTHER FUNCTIONS "RPT": Use it automatic and random selection of the disc which you are currently listening to. When "RAND" is touched, the system selects a track in the disc you are currently listening to. To cancel it, touch "RAND" once again. - 2008 Toyota Sienna | Navigation Manual - Page 181
Finish AUDIO/VIDEO SYSTEM : By touching this touch screen button, the list moves up by 6 folder groups. If this touch screen button is touched when the top page of - 2008 Toyota Sienna | Navigation Manual - Page 182
Finish AUDIO/VIDEO SYSTEM Touch the desired file number. The player will start playing the selected file from the beginning. : By touching this touch screen button, the list moves - 2008 Toyota Sienna | Navigation Manual - Page 183
Finish AUDIO/VIDEO SYSTEM OTHER FUNCTIONS "RPT": Use it for automatic condition of some DVD video discs may be determined by a DVD video software producer. This DVD player plays a disc as the software producer intended. So some functions may not work properly. Be sure to read the instruction manual - 2008 Toyota Sienna | Navigation Manual - Page 184
when the video screen is first displayed after the engine switch is set at ACC or ON. Touch "OK" when you read the message. PLAYING A DVD DISC Push the "AUDIO" button to display this screen. When you touch "WIDE", the screen mode can be changed. It you touch "PICTURE" when the vehicle is completely - 2008 Toyota Sienna | Navigation Manual - Page 185
AUDIO/VIDEO SYSTEM the menu screen for DVD video appears. (For the operation, see the manual that come with the DVD video disc provided separately.) : The menu control playing from there. "AUDIO": The audio changing screen appears. (See page 205.) "Subtitle": The subtitle changing screen appears. (See - 2008 Toyota Sienna | Navigation Manual - Page 186
AUDIO/VIDEO SYSTEM SELECTING A MENU ITEM Enter the menu item using Y, ", B and A and touch "Enter". The player starts playing video for that menu item. (For details, see the manual When you touch returns. , the previous screen CHANGING THE SUBTITLE LANGUAGE Each time you touch "Subtitle", the language - 2008 Toyota Sienna | Navigation Manual - Page 187
Finish AUDIO/VIDEO SYSTEM CHANGING THE AUDIO LANGUAGE Each time you touch "AUDIO", the language is selected from the ones stored in the discs and changed. When you touch returns. , the previous screen CHANGING THE ANGLE The angle can be selected for discs that are multi−angle compatible when the - 2008 Toyota Sienna | Navigation Manual - Page 188
the entry of language code, see the following "ENTER AUDIO LANGUAGE CODE". To return to the "Setup Menu" screen, touch . D Parental lock The level of viewer restrictions can be changed. 1. Touch "Parental Lock". 2. Enter the 4−digit personal code on the "Enter Personal Code" screen. If you enter - 2008 Toyota Sienna | Navigation Manual - Page 189
Finish AUDIO/VIDEO SYSTEM ENTER AUDIO LANGUAGE CODE 0920 0519 2608 1412 1620 1922 1821 1115 0512 0101 0102 0106 0113 0118 0119 0125 0126 0201 0205 0207 0208 Italian Spanish Chinese Dutch - 2008 Toyota Sienna | Navigation Manual - Page 190
Finish AUDIO/VIDEO SYSTEM 0714 0721 0801 0809 0818 0821 0825 0901 0905 0911 0914 0919 0923 1009 1023 1101 1111 1112 1113 1114 1119 Guarani Gujarati Hausa Hindi - 2008 Toyota Sienna | Navigation Manual - Page 191
Finish AUDIO/VIDEO SYSTEM 1918 1919 1920 1921 1923 2001 2005 2007 2008 2009 2011 2012 2014 2015 operation from the rear seat, touch "Play". The player will resume normal play. Under the same condition, the rear passenger can cancel the setup operation from the front seat. To lock the operation - 2008 Toyota Sienna | Navigation Manual - Page 192
Finish AUDIO/VIDEO SYSTEM "Hide Buttons": Touching this will turn off the controls from the screen Push the "AUDIO" button to display this screen. When you touch "WIDE", the screen mode can be changed. It you touch "PICTURE" when the vehicle is completely stopped and the parking brake is applied, - 2008 Toyota Sienna | Navigation Manual - Page 193
the disc or insert it correctly. If a disc which is not playable is inserted, "DISC CHECK" will also appear on the screen. For appropriate discs for this player, see "Audio/video system operating hints" on page 213. If "REGION CODE ERROR" appears on the display: It indicates that the DVD region - 2008 Toyota Sienna | Navigation Manual - Page 194
AUDIO/VIDEO SYSTEM (i) DVD player and DVD video disc information DVD VIDEO DISCS This DVD player conforms to NTSC color TV formats. The DVD video disc conforming to another formats such as PAL or SECAM cannot be used. Region codes: Some DVD video discs have a region code or replaced with other - 2008 Toyota Sienna | Navigation Manual - Page 195
may cause a noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction. RADIO RECEPTION Usually, a problem with radio reception does not mean there is a problem with your radio - it is just the normal result of conditions outside the vehicle - 2008 Toyota Sienna | Navigation Manual - Page 196
or telephone wires can interfere with AM signals. And of course, radio signals have a limited range. The farther you are from a station, the weaker its signal will be. In addition, reception conditions change constantly as your vehicle moves. Here are some common reception problems that probably - 2008 Toyota Sienna | Navigation Manual - Page 197
Finish AUDIO/VIDEO SYSTEM Audio CDs DVD video discs Video CDs CD changer D Use only discs marked as shown above. The following products may not be playable on your changer. - 2008 Toyota Sienna | Navigation Manual - Page 198
AUDIO/VIDEO SYSTEM NOTICE D Do not use special shaped, transparent/translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc. D This system up to the light.) D Remove discs - 2008 Toyota Sienna | Navigation Manual - Page 199
Finish AUDIO/VIDEO SYSTEM To clean a compact disc: Wipe it with a soft, lint−free cloth that has been dampened with water. Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, lint−free cloth. Do not use a conventional record cleaner or anti− - 2008 Toyota Sienna | Navigation Manual - Page 200
AUDIO/VIDEO SYSTEM D The MP3 player is compatible with VBR D (Variable Bit Rate). When playing back files recorded as VBR (Variable Bit Rate) files, the play time will not be correctly displayed if fast−forward or reverse operations are used. It is not possible to check other storage conditions. The - 2008 Toyota Sienna | Navigation Manual - Page 201
Finish AUDIO/VIDEO SYSTEM TERMS Packet write- This is a general term that describes the process compresses audio data to about 1/10 the size of that on conventional discs. WMA- WMA (Windows Media Audio) is an audio compression format developed by Microsoft. It compresses files into a size smaller - 2008 Toyota Sienna | Navigation Manual - Page 202
Finish AUDIO/VIDEO SYSTEM 220 - 2008 Toyota Sienna | Navigation Manual - Page 203
APPENDIX SECTION APPENDIX Appendix 7 Limitations of the navigation system ...222 Map database information and updates ...224 VII 221 - 2008 Toyota Sienna | Navigation Manual - Page 204
shown depending on the satellite condition, road configuration, vehicle condition or other circumstances. The Global Positioning System (GPS) developed and of the antenna in the instrument panel. We advise against the use of window tinting on vehicles equipped with navigation systems. When your - 2008 Toyota Sienna | Navigation Manual - Page 205
a change of direction by going forward and backward, or turning on a turntable in the parking lot. D When leaving a covered parking lot or parking garage. D When a roof carrier is installed. D When driving with tire chains installed. D When the tires are worn. D After replacing a tire or tires - 2008 Toyota Sienna | Navigation Manual - Page 206
and map data stored in your navigation system may not be complete or may not be the latest version. After replacing the tire, implement the operation described in the "D Current position/tire change calibration". (See page 107.) This navigation system uses tire turning data and is designed to work - 2008 Toyota Sienna | Navigation Manual - Page 207
CONDITIONS Personal Use Only. You agree to use this Data together with the navigation system for the solely personal, non−commercial purposes for which you were licensed, and not for service disassemble or reverse engineer any portion of this changing representations or warranties of any - 2008 Toyota Sienna | Navigation Manual - Page 208
, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF [CLIENT] OR ITS LICENSORS HAVE , or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the - 2008 Toyota Sienna | Navigation Manual - Page 209
OF THE SPATIAL MAP DATABASE, INCLUDING LOCATION CODES AND RELATED PRODUCTS (COLLECTIVELY, THE "DATABASE"), USED IN THE NAVIGATION SYSTEM. BY USING THE NAVIGATION SYSTEM AND THE DATABASE, YOU ACCEPT AND AGREE TO BE BOUND BY ALL TERMS AND CONDITIONS SET FORTH BELOW. LICENSE GRANT Denso Corporation - 2008 Toyota Sienna | Navigation Manual - Page 210
the DATABASE to third parties, except together with the system for which it was created, provided that you do not retain any copy of the DATABASE, and provided that the transferee agrees to all terms and conditions of this AGREEMENT. DISCLAIMER OF WARRANTY THE DATABASE IS PROVIDED ON AN "AS IS" AND - 2008 Toyota Sienna | Navigation Manual - Page 211
due to the passage of time, changing circumstances, and due to the nature of height, weight or other limits; road or traffic conditions; special events; traffic congestion; or travel time. technical data − commercial items clause); FAR 52.227−14 Alternates I, II, and III (JUN 1987) (civilian agency - 2008 Toyota Sienna | Navigation Manual - Page 212
exempt from any statute, law, regulation, or code, including any Sunshine Act, Public Records Act, Freedom SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part provided by infoUSA Inc. ("infoUSA"). By using the POI Data, you accept and agree to all terms and conditions - 2008 Toyota Sienna | Navigation Manual - Page 213
purposes, and not for service bureau, time−sharing or may not decompile, disassemble or reverse engineer any portion of this information, and information with any products, systems, or applications installed or TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN - 2008 Toyota Sienna | Navigation Manual - Page 214
In one type of area, primarily around metropolitan centers, detailed route guidance is available for the entire area. changed. In some places, construction on roads may be in progress. For that reason, information on some areas in this system might be different from the actual location. - Changing - 2008 Toyota Sienna | Navigation Manual - Page 215
dealer for information about the availability and pricing of an update. INFORMATION Under extremely cold conditions, the display may react slowly or during sudden braking or in an accident. D To reduce the chance of injury in the case of an accident or sudden stopping while driving, keep the - 2008 Toyota Sienna | Navigation Manual - Page 216
APPENDIX D To confirm the database version and disc coverage area 1. Push the "MENU" button. Make sure the version of the database on this screen. To display the disc coverage area, touch "Covered Area". Confirm the covered area on the screen. Contact your dealer to find out if there is a more - 2008 Toyota Sienna | Navigation Manual - Page 217
such as restaurants and banks. If a destination is not in the database, you can enter the street address or a major intersection close to it and the system will guide you there. The system will provide both a visual map and audio instructions. The audio instructions will announce the distance - 2008 Toyota Sienna | Navigation Manual - Page 218
the entire Navigation System Owner's Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable touch screen buttons - 2008 Toyota Sienna | Navigation Manual - Page 219
guidance. The data in the system may occasionally be incomplete. Road conditions, including driving restrictions (no left turns, street closures, etc.) frequently change. Therefore, before following any instruction from the system, look to see whether the instruction can be done safely and legally - 2008 Toyota Sienna | Navigation Manual - Page 220
- Quick reference North−up or heading−up symbol This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map orientation...36 2 Scale indicator This figure indicates the map scale...33 1 "INFO" button Push this button to display the "Information" screen...110, - 2008 Toyota Sienna | Navigation Manual - Page 221
on the screen are not displayed. They are displayed again by touching "ON"" "...103 9 8 Screen configuration touch screen button Touch this touch screen button to change the screen mode...31 14 Zoom in touch screen button Touch this touch screen button to magnify the map scale...33 11 Foot print - 2008 Toyota Sienna | Navigation Manual - Page 222
the distance, the estimated travel time to the destination, and the estimated arrival time at the destination...70 "GPS" mark (Global Positioning System) Whenever your vehicle is receiving signals from the GPS, this mark is displayed...222 17 16 15 - "Destination" screen 18 Speech command - 2008 Toyota Sienna | Navigation Manual - Page 223
for the "Destination" screen can be viewed on this screen...26 "Change" To change the search area, touch this touch screen button...42 Quick access touch 45 "Emergency" One of the four categories of emergency service points that are already stored in the system's database can be selected...56 6 7 - 2008 Toyota Sienna | Navigation Manual - Page 224
Coordinates" A destination can be set by using latitude and longitude as coordinates...60 The "Menu" screen allows effective use of the navigation system. To display the "Menu" 0U5041 screen, push the "MENU" button. "Suspend Guidance" and "Resume Guidance" Suspends or resumes guidance ...84 "Volume - 2008 Toyota Sienna | Navigation Manual - Page 225
" Up to 3 different settings for different users can be memorized...86 "Setup" Enables various settings for the navigation system...9, 100 6 5 4 - "Setup" screen "My Places" Enables changes to "Memory points", "Home" and "Areas to avoid". Enables deletion of the previous point...88 The items shown - 2008 Toyota Sienna | Navigation Manual - Page 226
Time" The system to display the travel time and the arrival time to the destination on the route guidance screen can be set...101 "Keyboard Layout" Key layout can be changed...102 " position ...104 mark can be done manually, or mis−calculation by changing tire will be adjusted...107 " Function" 10