2008 Toyota Tacoma Owners Manual - Page 133

08 02.19 LS13035 LS13036 Install the child restraint system on the right front passenger seat (regular cab models with bench seat) or front passenger seat (double cab models) only when it is unavoidable. Your vehicle is equipped with a front passenger occupant classification system. In order to activate the occupant classification system correctly, install the forward−facing child restraint system on the front passenger seat in the following order: 1. Turn the engine switch to the "ON" position. To remove the infant seat: Press the buckle release button and allow the belt to retract completely. The belt will move freely again and be ready to work for an adult or older child passenger. (B) CONVERTIBLE SEAT INSTALLATION A convertible seat must be used in forward−facing or rear −facing position depending on the age and size of the child. When installing, follow the manufacturer's instructions about the applicable age and size of the child as well as directions for installing the child restraint system. 2. Move the right front passenger seat (regular cab models with bench seat) or front passenger seat (double cab models) to the rearward position. 3. Put the child restraint system on the right front passenger seat (regular cab models with bench seat) or front passenger seat (double cab models) without putting your weight on the right front passenger seat (regular cab models with bench seat) or front passenger seat (double cab models). 4. Insert the seat belt tab into the seat belt buckle. 109 2008 TACOMA from Apr. '08 Prod. (OM35898U)