2008 Toyota Tundra Owners Manual - Page 154

07 11.20 Same angle Same position CAUTION D After inserting the tab, make sure XS13151 XS13047 the tab and buckle are locked and that the lap and shoulder portions of the belt are not twisted. D Do not insert coins, clips, etc. in the buckle as this may prevent your child from properly latching the tab and buckle. D If the seat belt does not function D Bench seat: In order to firmly secure the child restraint system to the center front passenger seat, align the seatback angle and seat position of the right front passenger seat to match the center front passenger seat. If the child restraint system cannot be firmly secured, install it onto the right front passenger seat. Otherwise, it could cause death or injury in a collision. To install the forward−facing convertible seat: 1. Run the lap and shoulder belt through or around the convertible seat following the instructions provided by its manufacturer and insert the tab into the buckle taking care not to twist the belt. Keep the lap portion of the belt tight. For instructions concerning the installation of the rear −facing convertible seat, see "(A) INFANT SEAT INSTALLATION" on page 118. normally, it cannot protect your child from death or serious injury. Contact your Toyota dealer immediately. Do not install the child restraint system on the seat until the seat belt is fixed. D Bench seat: If the child restraint system installed on the center front passenger seat interferes with the driver, install it onto the right front passenger seat. 124 2008 TUNDRA from Apr. '08 Prod. (OM34477U)